Rose,
Have you tried the upgrade by pressing dots 4 6 with the reset
and then dots 1 2with no reset and then dots 4 5 with a reset?
I'm using a qt but I believe thatis the sequence I used.
Give that a shot.
It surely could not make things any worse.
Stacey and Chesley
----- Original Message -----
From: "Rose Combs" <[EMAIL PROTECTED]
To: "'Braillenote List'" <[email protected]
Date: Sun, 9 Jul 2006 01:48:13 -0700
Subject: RE: [Braillenote] 7.01 Upgrade Question
If that is so, how come I am still getting errors on two cards I
definitely
ran the prepare utility on, one which I had used last spring to
get the 7.0
upgrade before I knew it would be mailed, and one just out of its
package,
and run on the prepare utility. All three cards are readable on
the BN as
well as the computer?
Yes, I know, I am bugging you Jonathan , but I am not the only
person having
my problems. I still have a hunch it relates to something that
did not go
right with the bootloader, as nothing happened when I installed 7
and used
the 1-2 with the reset button as the instructions on the web site
and in my
package later seemed to tell me to do.
Anyone else having the problems, especially the SD card error,
did you also
have a problem with the boot file in January or whenever you did
7. At the
time since the installation went without a hitch I thought
nothing of it but
hindsight tells me this may be where the problem could exist. I
am not a
programmer, just tossing it out there to see if maybe I can
intuit my way to
helping get a solution--as this seems to be something I have done
in the
past at work and at home.
It may be worth a though at least.
Rose Combs
[EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Jonathan Mosen
Sent: Saturday, July 08, 2006 2:41 PM
To: 'Braillenote List'
Subject: RE: [Braillenote] 7.01 Upgrade Question
Hi Jim, I suspect that what has happened in this case is that you
received a
card that was, in fact, not prepared correctly. HumanWare did
send a bunch
of these out and we apologise for this. When the unit goes dead
like that,
it suggests that the SD card is formatted with FAT 32, not FAT 16
as is
necessary. We did post a message about this when we discovered
the error a
few months back, but if you had already installed, it may not
have been
important to you at the time. So if you run the Prepare SD card
for upgrade
utility on this card, you should find it works just fine. Hope
this helps.
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
