Which BN do you have?
Jim
----- Original Message -----
From: "chamandeep" <[EMAIL PROTECTED]>
To: "Braillenote List" <[email protected]>
Sent: Wednesday, November 22, 2006 1:44 PM
Subject: Re: [Braillenote] printing and embossing
hello.
The problem is that there is no serial port on the juliet pro.
at the moment i am using the adapter that came with the bn with a
parallelle wire attached to the other side and the other end into
the embosser.
thanks for your help
Chaman
----- Original Message -----
From: "James Aldrich" <[EMAIL PROTECTED]
To: "Braillenote List" <[email protected]
Date sent: Wed, 22 Nov 2006 13:03:03 -0700
Subject: Re: [Braillenote] printing and embossing
Chaman,
Do not use a null modem cable.
Your best bet is to use the serial port on your Juliet Pro.
Change the
handshaking in menu two, option 8 from zero, Xon/Xoff to one, DTR
and CTS.
You would do the following:
zero point two enter, eight point one enter one point one enter.
Check to
see all other serial parameters match between your M-power and
Juliet Pro.
I believe they would with the exception of the menu item in your
Juliet Pro
I asked you to change. Menu
one is set up for parallel port. If you wish to use that, you
will need to
get the bluetooth adapter or infrared adapter from Enabling
technologies.
If you change that one setting, you should be good to go. If you
need more
assistance, please feel free to write.
Jim Aldrich
----- Original Message -----
From: "chamandeep" <[EMAIL PROTECTED]
To: "Braille note list" <[email protected]
Sent: Wednesday, November 22, 2006 1:24 AM
Subject: [Braillenote] printing and embossing
hello list.
i tried to use a hp laserjet printer via the serial port. I got
a message
saying that the printing was complete.
But i had nothing print from the printer. I tried to check the
communication with the two devices by taking the serial cable
out of the
bn. After taking out the serial cable i received the same
message as
before, (printing complete)
The other thing i tried to do was emboss using the juliet pro
embosser.
After setting up everything i got a message saying embossing but
nothing
seemed to be happening.
I need the printer and the embosser to work otherwise i can't
print my
school work.
Please could someone get back to me as soon as possible and help
me
resolve these issues.
Thanks
Chaman
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
