If WLL doesn't have the part.The part you need is an AKO-13120/01. Contact [email protected] or go to their website http://www.furneco.com/ The part is 40 but they charged me 102 to send it overnight UPS. See if you can arrange cheaper mailing. Also first check the wiring into the controller to make sure it is not a loose or burnt wire before ordering the part. If you order the part from Canada it will come programed for refrigeration. It is easy to change the parameters On Sat, Aug 29, 2009 at 6:33 AM, ken k <[email protected]> wrote:
> > To clarify, the LED to which I refer is the LED display for the > temperature, error codes, etc. > > Thanks > Ken K > > On Aug 29, 7:53 am, ken k <[email protected]> wrote: > > Well, after 4 1/2 years, we finally have a problem with our beloved B > > 1. This AM when the machine turned on, the LED did not light. The > > machine heated up and the there is no appreciable change in the > > espresso. > > > > I don't recall whether this is a known problem with a clear solution. > > If there is a solution other than the obvious one of replacing the > > part, I would be grateful for the information. If this is a part only > > available through WLL, then I will contact Todd to arrange for a part > > to be shipped, but if this is a part that can be sourced elsewhere, I > > would appreciate that info, as well. > > > > Thanks > > Ken K > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
