I suspect your B1 tubing is the same as the tubing used on the B2 boilers. Order from WLL but it could be back ordered. It is a special high temp product; standard tubing used for icemakers will NOT work. BT,DT. If hose line runs next to (or on) boilers, suggest you protect line by double wrapping or rerouting hose at touch points. EZ wrap technique is to get a short piece of similar diameter hose and slit length-wise, slip over existing hose then wrap w/black tape. B2 hose is very susceptible to blowouts at the boiler area. Since your machine is 4 1/2 years old & this is your first time to even think about the hose, the routing must be somewhat different from the B2. Good luck. Tom
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
