Ben, thats the pressurestat . if the fitting that attaches the pipe
leaks, use teflon tape - if the part is leaking, replace. myself and
others upgrade to the Jaegerstat from chris coffee service, but a stock
$30 one works good.
On 1/22/2012 9:05 AM, Benjamin McCafferty wrote:
Thanks Stevie!
I found the leak, and posted a picture in another message. I had the same
failure you described, and added some silicon hose over the water line where it
rubs.
b
On Jan 22, 2012, at 7:39 AM, StevieG. wrote:
Hi Ben - I had this same problem a while back, and found that the
plastic line from the back boiler had cracked where it was rubbing on
the top edge of the boiler. There was an indentation in the
insulation and the plastic was rubbing on the sharp edge.
Just a thought....
--
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/brewtus?hl=en.
--
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/brewtus?hl=en.
