OK, sorry, I'm missing something. I ordered the p-stat from Chris' Coffee. Are you saying I'll need a new gauge also, i.e. that the stock one will no longer work?
tx, bmc On Jan 23, 2012, at 10:20 AM, Dennis Keating wrote: > i'm looking at my spare presstat and therem are only wire id nos on it - no > p/n. the press regulator i use is grainger p/n 2A645. you will need a > gauge, too. > > On 1/22/2012 5:16 PM, Benjamin McCafferty wrote: >> >> Thanks Dennis, appreciate the reply. Stupid question--the pressure stat >> controls pressure in the steam boiler, yes? Does it also control idle >> pressure in the brew boiler? Recognizing that the OPV or setting on the >> rotary pump controls brew pressure. >> >> The black plastic seems to be what's leaking intermittently on mine--I'm >> pointing to the leak in the photo with my easter egg dipper, er, fancy grind >> stirrer and clump buster... >> >> Will get the new one ordered--do you happen to remember your part number? >> I'll look, perhaps there's only one. >> >> b >> >> On Jan 22, 2012, at 1:42 PM, Dennis Keating wrote: >> >>> Ben, thats the pressurestat . if the fitting that attaches the pipe leaks, >>> use teflon tape - if the part is leaking, replace. myself and others >>> upgrade to the Jaegerstat from chris coffee service, but a stock $30 one >>> works good. >>> >>> On 1/22/2012 9:05 AM, Benjamin McCafferty wrote: >>>> >>>> Thanks Stevie! >>>> I found the leak, and posted a picture in another message. I had the same >>>> failure you described, and added some silicon hose over the water line >>>> where it rubs. >>>> b >>>> >>>> On Jan 22, 2012, at 7:39 AM, StevieG. wrote: >>>> >>>>> Hi Ben - I had this same problem a while back, and found that the >>>>> plastic line from the back boiler had cracked where it was rubbing on >>>>> the top edge of the boiler. There was an indentation in the >>>>> insulation and the plastic was rubbing on the sharp edge. >>>>> >>>>> Just a thought.... >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Brewtus" group. >>>>> To post to this group, send email to [email protected]. >>>>> To unsubscribe from this group, send email to >>>>> [email protected]. >>>>> For more options, visit this group at >>>>> http://groups.google.com/group/brewtus?hl=en. >>>>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Brewtus" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/brewtus?hl=en. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/brewtus?hl=en. > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
