two very expensive parts in eight years. That SUCKS!!
On Fri, May 24, 2013 at 2:26 PM, runtmms <[email protected]> wrote: > I just received a new control board for my Brewtus, and it has a slightly > different pin configuration than my old one. My Brewtus was purchase in > 2004, and I replaced the control board in 2009. The old board has 8 pins, > the new one has 9 pins. It looks like I can just go by pin names except the > old board has a "Fase" pin and the new one doesn't. I am left with pin 7 or > 10 to choose from. I called WLL and was told to try pin 7. When I do that > it trips the house breaker. Same result for pin 10. > > I replaced the board due to an E1 error - there was no breaker issue with > the old board. The diagram on the two boards look different with respect to > how they are named - so maybe I can't go by name? Can anyone help? > > Thanks, Merlynn > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus?hl=en. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
