Hi Ira, thanks for the response. I was able to look at the wire and found no marks on it. I did however notice a small cut on the gray 'cap' that sits right above the hex head that screws into the boiler. (this is where the wires pass through) I wonder if this could be the cause of the erratic reading.
On Wednesday, July 10, 2013 12:20:57 PM UTC-4, Ira wrote: > > Hello Ian, > > Wednesday, July 10, 2013, 8:50:57 AM, you wrote: > > > The PID unit on my IV-R is acting very erratic. Displaying seemingly > random temperatures after initial set up on a outlet timer. > > Have you opened it up and followed the sense wire from the PID to the > boiler to see if it's rubbed on a sharp edge. > > -- Ira > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/groups/opt_out.
