Sorry for all the updates but this thing has me stumped. This morning when I tested I was getting power to A1, A2 and LI. Now there is only the power coming to T1 from the pressure stat. The PID has power so now I'm thinking it's the PID itself and not the relay. The PID is not sending power to the relay so no LCD and no power going to the brew boiler. Anything else I should look at? Thanks guys
On Saturday, May 21, 2016 at 9:54:59 AM UTC-4, BklynJim wrote: > > Checked the voltage again. No power at all to the relay when the steam > boiler is heating. After the steam boiler reaches temperature I 120v at > A1, A2, AND L1. I'm seeing no power at T1 and no LCD light on the relay. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
