Hi All, The new PID went in without a hitch and my Brewtus is back. All is well...but looks like a have a new (intermittent) problem with the pump and/or OPV. I'll start a new thread on that. Thanks for the help all.
On Thursday, May 12, 2016 at 6:37:26 PM UTC-4, BklynJim wrote: > > > Hi guys, > The LCD readout on my non-pid temperature controller stopped working. The > machine still heats up but the display doesn't show anything. Sometimes > the display works when the machine is cold and then cuts out. It also > seems to be under temperature based on my instant thermometer reading from > the group head. Should I replace the non-pid controller or make the jump > to the GICAR pid? I just missed the WLL tech team for the day so I'll try > them again tomorrow but does anyone know if they still sell the non-pid > controller? Thanks for the advice. > Jim > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
