Just got off the phone with Todd. What awesome tech support. He diagnosed the problem with the PID in 5 minutes. I'm really impressed with Todd and WLL. I'll update the group after I complete the install. Thanks again all.
On Saturday, May 21, 2016 at 1:10:12 PM UTC-4, BklynJim wrote: > > Sorry for all the updates but this thing has me stumped. This morning > when I tested I was getting power to A1, A2 and LI. Now there is only the > power coming to T1 from the pressure stat. The PID has power so now I'm > thinking it's the PID itself and not the relay. The PID is not sending > power to the relay so no LCD and no power going to the brew boiler. > Anything else I should look at? Thanks guys > > On Saturday, May 21, 2016 at 9:54:59 AM UTC-4, BklynJim wrote: >> >> Checked the voltage again. No power at all to the relay when the steam >> boiler is heating. After the steam boiler reaches temperature I 120v at >> A1, A2, AND L1. I'm seeing no power at T1 and no LCD light on the relay. > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
