Yea - that's what i was thinking - a piece of sediment got in the pstat. Just found this video from WLL; he is saying the relief valvr starts to open around 1.5 and pstat set to 1.3 https://www.youtube.com/watch?v=WVKg4z3yhkI
Thanks bmc - i appreciate the response. I should be good to go now. On Fri, Jun 19, 2020, 11:39 AM 'Benjamin McCafferty' via Brewtus < [email protected]> wrote: > I believe mine blew off at about 2 bar, from memory. I ran pressure around > 1.5 all the time. Thinking it through, I wonder if a piece of scale/mineral > has gotten to the p-stat and caused it to stick? I.e. then it keeps heating > the steam boiler unchecked until the valve opens? > > best, > bmc > > On Jun 19, 2020, at 08:14, triplereef . <[email protected]> wrote: > > Question for you guys: > > At what pressure does your pressure relief valve connecting the steam wand > start to open? > > I ask because i am troubleshooting this valve opening during normal > heat-up at around 1.75 bar right now. I'm fairly sure my steam boulier > usually sits at 1.5 bar but i havevn't paid much attention to it. > > My issue started after a two-flush descale i performed yesterday (it had > been a while since my last descale) > > Thank you - trying to get my bearings for what correct pressure should be. > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/CAA-TRKoDMJnfxzLiD1j7BP5aH_iO6Z0VFKLVZ5YKvtrBnOgVOQ%40mail.gmail.com > <https://groups.google.com/d/msgid/brewtus/CAA-TRKoDMJnfxzLiD1j7BP5aH_iO6Z0VFKLVZ5YKvtrBnOgVOQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > <20200619_110746.jpg> > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/89429179-2E41-4AFC-9A17-DFCFF71EED74%40me.com > <https://groups.google.com/d/msgid/brewtus/89429179-2E41-4AFC-9A17-DFCFF71EED74%40me.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAA-TRKpwexjc38E9jDrXYS_V3-8pqp6b4r-H5P9HhSkVj6NbSw%40mail.gmail.com.
