At 03:10 PM 4/7/02 -0500 Robert Seeberger wrote:
>There is a notch in the middle on one side of most drives. But if it isnt
>there, the red stripe usually goes on the same side as the power connector.
>Be careful cuz sometimes there are atypical setups. But you should be safe
>with that. The red stripe denotes wire 1 on the cable. You might be able to
>find a 1 where it connects on the drive also.
Ok, I figured out how to properly hook up the slave drive. (When I hook it
up the wrong way, the computer won't boot. :) Unfortunatley, when I hook
up the slave drive, it says "Slave.... Not Detected" and then tells me that
I have an invalid boot disk.
Any ideas? I am going to try and make a boot disk off of my work computer
today.
I am running Win 95 4.00.950B. Anyone know if it will handle a large hard
drive?
JDG
__________________________________________________________
John D. Giorgis - [EMAIL PROTECTED] - ICQ #3527685
"We fight against poverty because faith requires it and
conscience demands it." - George W. Bush 3/22/02
