Hi,
I tried with Ubuntu 17.04 but the error still remains the same. I believe
it is unable to read *expscan.h* file where perplex template is defined. It
is showing the same with both the latest as well as the r70379 version.
In file included from /usr/brlcad/src/other/stepcode/src/express/express.
> c:86:0:
> /usr/brlcad/src/other/stepcode/src/express/parse_data.h:5:5: error:
> unknown type name ‘perplex_t’
> perplex_t scanner;
> ^~~~~~~~~
> /usr/brlcad/src/other/stepcode/src/express/express.c: In function
> ‘PARSERrun’:
> /usr/brlcad/src/other/stepcode/src/express/express.c:621:5: error:
> unknown type name ‘perplex_t’
> perplex_t scanner = perplexFileScanner( fp );
> ^~~~~~~~~
> src/other/stepcode/src/express/CMakeFiles/express.dir/build.make:529:
> recipe for target
> 'src/other/stepcode/src/express/CMakeFiles/express.dir/express.c.o'
> failed
> make[2]: ***
> [src/other/stepcode/src/express/CMakeFiles/express.dir/express.c.o]
> Error 1
> CMakeFiles/Makefile2:4685: recipe for target 'src/other/stepcode/src/
> express/CMakeFiles/express.dir/all' failed
> make[1]: *** [src/other/stepcode/src/express/CMakeFiles/express.dir/all]
> Error 2
> Makefile:160: recipe for target 'all' failed
> make: *** [all] Error 2
>
Also, the link you mentioned https://developer.amd.com/amd-
accelerated-parallel-processing-app-sdk/ doesn't exist as of now.
I've started with converting the HYP shot routine and will check its
performance once my working development environment develops.
Also, I went through the instructions to be followed and will make it a
point to give updates more frequently. Meanwhile, I had a few queries, both
general and specific:
- For acceptance as mentioned here
<http://brlcad.org/wiki/Summer_of_Code/Acceptance>, is there a specific
format (eg. in hard copy) or just a general mail in writing would do?
- For daily updates, do I start a new thread with just my mentor and
org-admin or in the group (also, in gsocax or in BRL-CAD developer mailing
list?)
- Would you prefer mail or other communication channel for daily update?
And any preferred timings for interaction?
Warm Regards,
*Sreyansh Kumhar Jain*
4th Year Undergraduate Student
Department of Mechanical Engineering
Indian Institute of Technology, Kharagpur
*+91-9933958066*
sreyanshjai...@gmail.com
Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
<https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
On Mon, Mar 26, 2018 at 8:42 AM, Sreyansh Jain <sreyanshjai...@gmail.com>
wrote:
> @Sean - Disabling bundled build does help a lot if not completely.
>
> @Vasco - Thank you for the detailed instructions. While working with
> r30379 version on Ubuntu 16.04, I got the following few errors as mentioned
> in the list attached. I've mentioned both 'make' and 'make -j4' results
> with the hope of better understanding. While I try to tweak the code a bit
> to make it work (like using expscan.h file content), it somehow leads to
> even more errors. Any clue? I'll now try doing these on Ubuntu 17.04 the
> way you mentioned.
>
>
>
> Also, since the deadline is approaching regarding the final proposal
> submission, do let me know if there are any changes to be made in the rough
> draft I submitted.
>
>
>
> Warm Regards,
>
> *Sreyansh Kumhar Jain*
> 4th Year Undergraduate Student
> Department of Mechanical Engineering
> Indian Institute of Technology, Kharagpur
> *+91-9933958066*
>
> sreyanshjai...@gmail.com
> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>
> On Sat, Mar 24, 2018 at 9:46 AM, Christopher Sean Morrison <brl...@mac.com
> > wrote:
>
>>
>>
>> On Mar 21, 2018, at 11:22 AM, Sreyansh Jain <sreyanshjai...@gmail.com>
>> wrote:
>>
>> I've tried symlinking awk to both gawk(4.1.3) and mawk, but I still get
>> the same error. I'm using Ubuntu 16.04.
>>
>> Also, I've made the changes in the proposal. Now that I'm aware roughly
>> about the tasks to be done, I think it's better to stick to either one of
>> BOT plate mode or BREP support. If time permits, I'll do the other. I'll do
>> a bit of detailed background study in both cases to check which one should
>> be plausible in the given time frame and update it in the proposal
>> accordingly.
>>
>>
>> There’s apparently some issue with our bundled libpng sources on your
>> system. Does disabling bundled build work? We usually recommend bundled
>> for simplicity, but the default should work too. Delete/Recreate your
>> build directory, then reconfigure:
>>
>> cd to the brlcad sources directory
>> rm -rf build
>> mkdir build
>> cd build
>> cmake .. -DCMAKE_BUILD_TYPE=Release -DBRLCAD_ENABLE_OPENCL=ON
>> make
>>
>> Cheers!
>> Sean
>>
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> BRL-CAD Developer mailing list
>> brlcad-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>
>>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
BRL-CAD Developer mailing list
brlcad-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-devel
