Hey, it's working! I started from scratch for everything. Now that I've set
it up, I'll start working with developing codes and their performance check
simultaneously.
Warm Regards,
*Sreyansh Kumhar Jain*
4th Year Undergraduate Student
Department of Mechanical Engineering
Indian Institute of Technology, Kharagpur
*+91-9933958066*
sreyanshjai...@gmail.com
Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
<https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
On Wed, May 9, 2018 at 10:15 PM, Vasco Alexandre da Silva Costa <
vasco.co...@gmail.com> wrote:
> In case you have issues with downloading the AMD APP SDK executable,
> here's a link to the .tar.bz2:
> https://drive.google.com/open?id=1wFzg1vohDHeebZn14IK12KOhbodS-zvS
>
> On Wed, May 9, 2018 at 2:35 PM, Vasco Alexandre da Silva Costa <
> vasco.co...@gmail.com> wrote:
>
>> Did you make sure you updated the sources.list and did an "sudo apt
>> update; sudo apt upgrade"?
>>
>> Note: Because Ubuntu 17.04 is EOL'ed you'll have to change the
>> sources.list to get apt-get to work properly. see:
>> https://stackoverflow.com/questions/48324701/google-compute-
>> engine-ubuntu-17-04-zesty-does-no-longer-have-a-release-file
>>
>>
>> As for the AMD APP SDK (OpenCL) download page, yeah it seems to be broken:
>> https://community.amd.com/community/devgurus/opencl
>>
>> Thankfully I had a copy of it around here. I've put it up here:
>> https://drive.google.com/open?id=1NZ6Z6j4aRHlZpBrjJHeSwdmu-LJgEpSa
>>
>>
>> On Wed, May 9, 2018 at 5:37 AM, Sreyansh Jain <sreyanshjai...@gmail.com>
>> wrote:
>>
>>> Hi,
>>>
>>> I tried with Ubuntu 17.04 but the error still remains the same. I
>>> believe it is unable to read *expscan.h* file where perplex template is
>>> defined. It is showing the same with both the latest as well as the r70379
>>> version.
>>>
>>> In file included from /usr/brlcad/src/other/stepcode
>>>> /src/express/express.c:86:0:
>>>> /usr/brlcad/src/other/stepcode/src/express/parse_data.h:5:5: error:
>>>> unknown type name ‘perplex_t’
>>>> perplex_t scanner;
>>>> ^~~~~~~~~
>>>> /usr/brlcad/src/other/stepcode/src/express/express.c: In function
>>>> ‘PARSERrun’:
>>>> /usr/brlcad/src/other/stepcode/src/express/express.c:621:5: error:
>>>> unknown type name ‘perplex_t’
>>>> perplex_t scanner = perplexFileScanner( fp );
>>>> ^~~~~~~~~
>>>> src/other/stepcode/src/express/CMakeFiles/express.dir/build.make:529:
>>>> recipe for target 'src/other/stepcode/src/expres
>>>> s/CMakeFiles/express.dir/express.c.o' failed
>>>> make[2]: *** [src/other/stepcode/src/expres
>>>> s/CMakeFiles/express.dir/express.c.o] Error 1
>>>> CMakeFiles/Makefile2:4685: recipe for target
>>>> 'src/other/stepcode/src/express/CMakeFiles/express.dir/all' failed
>>>> make[1]: *** [src/other/stepcode/src/express/CMakeFiles/express.dir/all]
>>>> Error 2
>>>> Makefile:160: recipe for target 'all' failed
>>>> make: *** [all] Error 2
>>>>
>>>
>>> Also, the link you mentioned https://developer.amd.com/amd-
>>> accelerated-parallel-processing-app-sdk/ doesn't exist as of now.
>>>
>>> I've started with converting the HYP shot routine and will check its
>>> performance once my working development environment develops.
>>>
>>>
>>> Also, I went through the instructions to be followed and will make it a
>>> point to give updates more frequently. Meanwhile, I had a few queries, both
>>> general and specific:
>>> - For acceptance as mentioned here
>>> <http://brlcad.org/wiki/Summer_of_Code/Acceptance>, is there a specific
>>> format (eg. in hard copy) or just a general mail in writing would do?
>>> - For daily updates, do I start a new thread with just my mentor and
>>> org-admin or in the group (also, in gsocax or in BRL-CAD developer mailing
>>> list?)
>>> - Would you prefer mail or other communication channel for daily
>>> update? And any preferred timings for interaction?
>>>
>>> Warm Regards,
>>>
>>> *Sreyansh Kumhar Jain*
>>> 4th Year Undergraduate Student
>>> Department of Mechanical Engineering
>>> Indian Institute of Technology, Kharagpur
>>> *+91-9933958066*
>>>
>>> sreyanshjai...@gmail.com
>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>
>>> On Mon, Mar 26, 2018 at 8:42 AM, Sreyansh Jain <sreyanshjai...@gmail.com
>>> > wrote:
>>>
>>>> @Sean - Disabling bundled build does help a lot if not completely.
>>>>
>>>> @Vasco - Thank you for the detailed instructions. While working with
>>>> r30379 version on Ubuntu 16.04, I got the following few errors as mentioned
>>>> in the list attached. I've mentioned both 'make' and 'make -j4' results
>>>> with the hope of better understanding. While I try to tweak the code a bit
>>>> to make it work (like using expscan.h file content), it somehow leads to
>>>> even more errors. Any clue? I'll now try doing these on Ubuntu 17.04 the
>>>> way you mentioned.
>>>>
>>>>
>>>>
>>>> Also, since the deadline is approaching regarding the final proposal
>>>> submission, do let me know if there are any changes to be made in the rough
>>>> draft I submitted.
>>>>
>>>>
>>>>
>>>> Warm Regards,
>>>>
>>>> *Sreyansh Kumhar Jain*
>>>> 4th Year Undergraduate Student
>>>> Department of Mechanical Engineering
>>>> Indian Institute of Technology, Kharagpur
>>>> *+91-9933958066*
>>>>
>>>> sreyanshjai...@gmail.com
>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>
>>>> On Sat, Mar 24, 2018 at 9:46 AM, Christopher Sean Morrison <
>>>> brl...@mac.com> wrote:
>>>>
>>>>>
>>>>>
>>>>> On Mar 21, 2018, at 11:22 AM, Sreyansh Jain <sreyanshjai...@gmail.com>
>>>>> wrote:
>>>>>
>>>>> I've tried symlinking awk to both gawk(4.1.3) and mawk, but I still
>>>>> get the same error. I'm using Ubuntu 16.04.
>>>>>
>>>>> Also, I've made the changes in the proposal. Now that I'm aware
>>>>> roughly about the tasks to be done, I think it's better to stick to either
>>>>> one of BOT plate mode or BREP support. If time permits, I'll do the other.
>>>>> I'll do a bit of detailed background study in both cases to check which
>>>>> one
>>>>> should be plausible in the given time frame and update it in the proposal
>>>>> accordingly.
>>>>>
>>>>>
>>>>> There’s apparently some issue with our bundled libpng sources on your
>>>>> system. Does disabling bundled build work? We usually recommend bundled
>>>>> for simplicity, but the default should work too. Delete/Recreate your
>>>>> build directory, then reconfigure:
>>>>>
>>>>> cd to the brlcad sources directory
>>>>> rm -rf build
>>>>> mkdir build
>>>>> cd build
>>>>> cmake .. -DCMAKE_BUILD_TYPE=Release -DBRLCAD_ENABLE_OPENCL=ON
>>>>> make
>>>>>
>>>>> Cheers!
>>>>> Sean
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------
>>>>> ------------------
>>>>> Check out the vibrant tech community on one of the world's most
>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>> _______________________________________________
>>>>> BRL-CAD Developer mailing list
>>>>> brlcad-devel@lists.sourceforge.net
>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>
>>>>>
>>>>
>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> BRL-CAD Developer mailing list
>>> brlcad-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>
>>>
>>
>>
>> --
>> Vasco Alexandre da Silva Costa
>> PhD in Computer Engineering (Computer Graphics)
>> Instituto Superior Técnico/University of Lisbon, Portugal
>>
>
>
>
> --
> Vasco Alexandre da Silva Costa
> PhD in Computer Engineering (Computer Graphics)
> Instituto Superior Técnico/University of Lisbon, Portugal
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> BRL-CAD Developer mailing list
> brlcad-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
BRL-CAD Developer mailing list
brlcad-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-devel
