It isn't. It is taking almost the same time for rt -o and rt -z command.
And with rt -z1, raytrace fails.
It isn't compiling Tk, Iwidgets, etc. and so there is no geometry window
coming up.
Warm Regards,
*Sreyansh Kumhar Jain*
4th Year Undergraduate Student
Department of Mechanical Engineering
Indian Institute of Technology, Kharagpur
*+91-9933958066*
sreyanshjai...@gmail.com
Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
<https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
On Sat, May 12, 2018 at 9:37 PM, Vasco Alexandre da Silva Costa <
vasco.co...@gmail.com> wrote:
> Cool!
> Make sure to send that application log later though. So we can see if it's
> actually using OpenCL mode properly.
>
> On Fri, May 11, 2018 at 7:51 PM, Sreyansh Jain <sreyanshjai...@gmail.com>
> wrote:
>
>> Apparently, I've problem which is stated here:
>> https://sourceforge.net/p/brlcad/discussion/362510/thread/49279c58/
>>
>> While retracing, I found that the only difference I made was directly
>> using
>> *$ sudo apt install clinfo cmake g++ libx11-dev subversion*
>> instead of
>> *$ sudo bash apt install clinfo cmake g++ libx11-dev subversion*
>> because latter gave this error: */usr/bin/apt: /usr/bin/apt: cannot
>> execute binary file*
>>
>> Rest all commands are exactly the same!
>>
>> Warm Regards,
>>
>> *Sreyansh Kumhar Jain*
>> 4th Year Undergraduate Student
>> Department of Mechanical Engineering
>> Indian Institute of Technology, Kharagpur
>> *+91-9933958066*
>>
>> sreyanshjai...@gmail.com
>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>
>> On Fri, May 11, 2018 at 12:08 AM, Vasco Alexandre da Silva Costa <
>> vasco.co...@gmail.com> wrote:
>>
>>> Cool, but make sure to show us an MGED log file with the OpenCL render
>>> mode on.
>>>
>>> BTW, I tested the BRL-CAD OpenCL branch, and, it compiles & runs on the
>>> latest Ubuntu 18.04 LTS with the AMD APP SDK. But the package dependencies
>>> to get it to recognize X11 and OpenGL are kinda convoluted.
>>>
>>> On Wed, May 9, 2018 at 7:10 PM, Sreyansh Jain <sreyanshjai...@gmail.com>
>>> wrote:
>>>
>>>> Hey, it's working! I started from scratch for everything. Now that I've
>>>> set it up, I'll start working with developing codes and their performance
>>>> check simultaneously.
>>>>
>>>> Warm Regards,
>>>>
>>>> *Sreyansh Kumhar Jain*
>>>> 4th Year Undergraduate Student
>>>> Department of Mechanical Engineering
>>>> Indian Institute of Technology, Kharagpur
>>>> *+91-9933958066*
>>>>
>>>> sreyanshjai...@gmail.com
>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>
>>>> On Wed, May 9, 2018 at 10:15 PM, Vasco Alexandre da Silva Costa <
>>>> vasco.co...@gmail.com> wrote:
>>>>
>>>>> In case you have issues with downloading the AMD APP SDK executable,
>>>>> here's a link to the .tar.bz2:
>>>>> https://drive.google.com/open?id=1wFzg1vohDHeebZn14IK12KOhbodS-zvS
>>>>>
>>>>> On Wed, May 9, 2018 at 2:35 PM, Vasco Alexandre da Silva Costa <
>>>>> vasco.co...@gmail.com> wrote:
>>>>>
>>>>>> Did you make sure you updated the sources.list and did an "sudo apt
>>>>>> update; sudo apt upgrade"?
>>>>>>
>>>>>> Note: Because Ubuntu 17.04 is EOL'ed you'll have to change the
>>>>>> sources.list to get apt-get to work properly. see:
>>>>>> https://stackoverflow.com/questions/48324701/google-compute-
>>>>>> engine-ubuntu-17-04-zesty-does-no-longer-have-a-release-file
>>>>>>
>>>>>>
>>>>>> As for the AMD APP SDK (OpenCL) download page, yeah it seems to be
>>>>>> broken:
>>>>>> https://community.amd.com/community/devgurus/opencl
>>>>>>
>>>>>> Thankfully I had a copy of it around here. I've put it up here:
>>>>>> https://drive.google.com/open?id=1NZ6Z6j4aRHlZpBrjJHeSwdmu-LJgEpSa
>>>>>>
>>>>>>
>>>>>> On Wed, May 9, 2018 at 5:37 AM, Sreyansh Jain <
>>>>>> sreyanshjai...@gmail.com> wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> I tried with Ubuntu 17.04 but the error still remains the same. I
>>>>>>> believe it is unable to read *expscan.h* file where perplex
>>>>>>> template is defined. It is showing the same with both the latest as
>>>>>>> well as
>>>>>>> the r70379 version.
>>>>>>>
>>>>>>> In file included from /usr/brlcad/src/other/stepcode
>>>>>>>> /src/express/express.c:86:0:
>>>>>>>> /usr/brlcad/src/other/stepcode/src/express/parse_data.h:5:5:
>>>>>>>> error: unknown type name ‘perplex_t’
>>>>>>>> perplex_t scanner;
>>>>>>>> ^~~~~~~~~
>>>>>>>> /usr/brlcad/src/other/stepcode/src/express/express.c: In function
>>>>>>>> ‘PARSERrun’:
>>>>>>>> /usr/brlcad/src/other/stepcode/src/express/express.c:621:5: error:
>>>>>>>> unknown type name ‘perplex_t’
>>>>>>>> perplex_t scanner = perplexFileScanner( fp );
>>>>>>>> ^~~~~~~~~
>>>>>>>> src/other/stepcode/src/express/CMakeFiles/express.dir/build.make:529:
>>>>>>>> recipe for target 'src/other/stepcode/src/expres
>>>>>>>> s/CMakeFiles/express.dir/express.c.o' failed
>>>>>>>> make[2]: *** [src/other/stepcode/src/expres
>>>>>>>> s/CMakeFiles/express.dir/express.c.o] Error 1
>>>>>>>> CMakeFiles/Makefile2:4685: recipe for target
>>>>>>>> 'src/other/stepcode/src/express/CMakeFiles/express.dir/all' failed
>>>>>>>> make[1]: ***
>>>>>>>> [src/other/stepcode/src/express/CMakeFiles/express.dir/all]
>>>>>>>> Error 2
>>>>>>>> Makefile:160: recipe for target 'all' failed
>>>>>>>> make: *** [all] Error 2
>>>>>>>>
>>>>>>>
>>>>>>> Also, the link you mentioned https://developer.amd.com/amd-
>>>>>>> accelerated-parallel-processing-app-sdk/ doesn't exist as of now.
>>>>>>>
>>>>>>> I've started with converting the HYP shot routine and will check its
>>>>>>> performance once my working development environment develops.
>>>>>>>
>>>>>>>
>>>>>>> Also, I went through the instructions to be followed and will make
>>>>>>> it a point to give updates more frequently. Meanwhile, I had a few
>>>>>>> queries,
>>>>>>> both general and specific:
>>>>>>> - For acceptance as mentioned here
>>>>>>> <http://brlcad.org/wiki/Summer_of_Code/Acceptance>, is there a
>>>>>>> specific format (eg. in hard copy) or just a general mail in writing
>>>>>>> would
>>>>>>> do?
>>>>>>> - For daily updates, do I start a new thread with just my mentor
>>>>>>> and org-admin or in the group (also, in gsocax or in BRL-CAD developer
>>>>>>> mailing list?)
>>>>>>> - Would you prefer mail or other communication channel for daily
>>>>>>> update? And any preferred timings for interaction?
>>>>>>>
>>>>>>> Warm Regards,
>>>>>>>
>>>>>>> *Sreyansh Kumhar Jain*
>>>>>>> 4th Year Undergraduate Student
>>>>>>> Department of Mechanical Engineering
>>>>>>> Indian Institute of Technology, Kharagpur
>>>>>>> *+91-9933958066*
>>>>>>>
>>>>>>> sreyanshjai...@gmail.com
>>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>>
>>>>>>> On Mon, Mar 26, 2018 at 8:42 AM, Sreyansh Jain <
>>>>>>> sreyanshjai...@gmail.com> wrote:
>>>>>>>
>>>>>>>> @Sean - Disabling bundled build does help a lot if not completely.
>>>>>>>>
>>>>>>>> @Vasco - Thank you for the detailed instructions. While working
>>>>>>>> with r30379 version on Ubuntu 16.04, I got the following few errors as
>>>>>>>> mentioned in the list attached. I've mentioned both 'make' and 'make
>>>>>>>> -j4'
>>>>>>>> results with the hope of better understanding. While I try to tweak the
>>>>>>>> code a bit to make it work (like using expscan.h file content), it
>>>>>>>> somehow
>>>>>>>> leads to even more errors. Any clue? I'll now try doing these on Ubuntu
>>>>>>>> 17.04 the way you mentioned.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Also, since the deadline is approaching regarding the final
>>>>>>>> proposal submission, do let me know if there are any changes to be
>>>>>>>> made in
>>>>>>>> the rough draft I submitted.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Warm Regards,
>>>>>>>>
>>>>>>>> *Sreyansh Kumhar Jain*
>>>>>>>> 4th Year Undergraduate Student
>>>>>>>> Department of Mechanical Engineering
>>>>>>>> Indian Institute of Technology, Kharagpur
>>>>>>>> *+91-9933958066*
>>>>>>>>
>>>>>>>> sreyanshjai...@gmail.com
>>>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>>>
>>>>>>>> On Sat, Mar 24, 2018 at 9:46 AM, Christopher Sean Morrison <
>>>>>>>> brl...@mac.com> wrote:
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Mar 21, 2018, at 11:22 AM, Sreyansh Jain <
>>>>>>>>> sreyanshjai...@gmail.com> wrote:
>>>>>>>>>
>>>>>>>>> I've tried symlinking awk to both gawk(4.1.3) and mawk, but I
>>>>>>>>> still get the same error. I'm using Ubuntu 16.04.
>>>>>>>>>
>>>>>>>>> Also, I've made the changes in the proposal. Now that I'm aware
>>>>>>>>> roughly about the tasks to be done, I think it's better to stick to
>>>>>>>>> either
>>>>>>>>> one of BOT plate mode or BREP support. If time permits, I'll do the
>>>>>>>>> other.
>>>>>>>>> I'll do a bit of detailed background study in both cases to check
>>>>>>>>> which one
>>>>>>>>> should be plausible in the given time frame and update it in the
>>>>>>>>> proposal
>>>>>>>>> accordingly.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> There’s apparently some issue with our bundled libpng sources on
>>>>>>>>> your system. Does disabling bundled build work? We usually recommend
>>>>>>>>> bundled for simplicity, but the default should work too.
>>>>>>>>> Delete/Recreate
>>>>>>>>> your build directory, then reconfigure:
>>>>>>>>>
>>>>>>>>> cd to the brlcad sources directory
>>>>>>>>> rm -rf build
>>>>>>>>> mkdir build
>>>>>>>>> cd build
>>>>>>>>> cmake .. -DCMAKE_BUILD_TYPE=Release -DBRLCAD_ENABLE_OPENCL=ON
>>>>>>>>> make
>>>>>>>>>
>>>>>>>>> Cheers!
>>>>>>>>> Sean
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ------------------------------------------------------------
>>>>>>>>> ------------------
>>>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>>> _______________________________________________
>>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>>> brlcad-devel@lists.sourceforge.net
>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------
>>>>>>> ------------------
>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>> _______________________________________________
>>>>>>> BRL-CAD Developer mailing list
>>>>>>> brlcad-devel@lists.sourceforge.net
>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Vasco Alexandre da Silva Costa
>>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Vasco Alexandre da Silva Costa
>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>
>>>>> ------------------------------------------------------------
>>>>> ------------------
>>>>> Check out the vibrant tech community on one of the world's most
>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>> _______________________________________________
>>>>> BRL-CAD Developer mailing list
>>>>> brlcad-devel@lists.sourceforge.net
>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>
>>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> BRL-CAD Developer mailing list
>>>> brlcad-devel@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>
>>>>
>>>
>>>
>>> --
>>> Vasco Alexandre da Silva Costa
>>> PhD in Computer Engineering (Computer Graphics)
>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> BRL-CAD Developer mailing list
>>> brlcad-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>
>>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> BRL-CAD Developer mailing list
>> brlcad-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>
>>
>
>
> --
> Vasco Alexandre da Silva Costa
> PhD in Computer Engineering (Computer Graphics)
> Instituto Superior Técnico/University of Lisbon, Portugal
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> BRL-CAD Developer mailing list
> brlcad-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
BRL-CAD Developer mailing list
brlcad-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-devel
