Cool!
Make sure to send that application log later though. So we can see if it's
actually using OpenCL mode properly.
On Fri, May 11, 2018 at 7:51 PM, Sreyansh Jain <sreyanshjai...@gmail.com>
wrote:
> Apparently, I've problem which is stated here:
> https://sourceforge.net/p/brlcad/discussion/362510/thread/49279c58/
>
> While retracing, I found that the only difference I made was directly
> using
> *$ sudo apt install clinfo cmake g++ libx11-dev subversion*
> instead of
> *$ sudo bash apt install clinfo cmake g++ libx11-dev subversion*
> because latter gave this error: */usr/bin/apt: /usr/bin/apt: cannot
> execute binary file*
>
> Rest all commands are exactly the same!
>
> Warm Regards,
>
> *Sreyansh Kumhar Jain*
> 4th Year Undergraduate Student
> Department of Mechanical Engineering
> Indian Institute of Technology, Kharagpur
> *+91-9933958066*
>
> sreyanshjai...@gmail.com
> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>
> On Fri, May 11, 2018 at 12:08 AM, Vasco Alexandre da Silva Costa <
> vasco.co...@gmail.com> wrote:
>
>> Cool, but make sure to show us an MGED log file with the OpenCL render
>> mode on.
>>
>> BTW, I tested the BRL-CAD OpenCL branch, and, it compiles & runs on the
>> latest Ubuntu 18.04 LTS with the AMD APP SDK. But the package dependencies
>> to get it to recognize X11 and OpenGL are kinda convoluted.
>>
>> On Wed, May 9, 2018 at 7:10 PM, Sreyansh Jain <sreyanshjai...@gmail.com>
>> wrote:
>>
>>> Hey, it's working! I started from scratch for everything. Now that I've
>>> set it up, I'll start working with developing codes and their performance
>>> check simultaneously.
>>>
>>> Warm Regards,
>>>
>>> *Sreyansh Kumhar Jain*
>>> 4th Year Undergraduate Student
>>> Department of Mechanical Engineering
>>> Indian Institute of Technology, Kharagpur
>>> *+91-9933958066*
>>>
>>> sreyanshjai...@gmail.com
>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>
>>> On Wed, May 9, 2018 at 10:15 PM, Vasco Alexandre da Silva Costa <
>>> vasco.co...@gmail.com> wrote:
>>>
>>>> In case you have issues with downloading the AMD APP SDK executable,
>>>> here's a link to the .tar.bz2:
>>>> https://drive.google.com/open?id=1wFzg1vohDHeebZn14IK12KOhbodS-zvS
>>>>
>>>> On Wed, May 9, 2018 at 2:35 PM, Vasco Alexandre da Silva Costa <
>>>> vasco.co...@gmail.com> wrote:
>>>>
>>>>> Did you make sure you updated the sources.list and did an "sudo apt
>>>>> update; sudo apt upgrade"?
>>>>>
>>>>> Note: Because Ubuntu 17.04 is EOL'ed you'll have to change the
>>>>> sources.list to get apt-get to work properly. see:
>>>>> https://stackoverflow.com/questions/48324701/google-compute-
>>>>> engine-ubuntu-17-04-zesty-does-no-longer-have-a-release-file
>>>>>
>>>>>
>>>>> As for the AMD APP SDK (OpenCL) download page, yeah it seems to be
>>>>> broken:
>>>>> https://community.amd.com/community/devgurus/opencl
>>>>>
>>>>> Thankfully I had a copy of it around here. I've put it up here:
>>>>> https://drive.google.com/open?id=1NZ6Z6j4aRHlZpBrjJHeSwdmu-LJgEpSa
>>>>>
>>>>>
>>>>> On Wed, May 9, 2018 at 5:37 AM, Sreyansh Jain <
>>>>> sreyanshjai...@gmail.com> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> I tried with Ubuntu 17.04 but the error still remains the same. I
>>>>>> believe it is unable to read *expscan.h* file where perplex template
>>>>>> is defined. It is showing the same with both the latest as well as the
>>>>>> r70379 version.
>>>>>>
>>>>>> In file included from /usr/brlcad/src/other/stepcode
>>>>>>> /src/express/express.c:86:0:
>>>>>>> /usr/brlcad/src/other/stepcode/src/express/parse_data.h:5:5: error:
>>>>>>> unknown type name ‘perplex_t’
>>>>>>> perplex_t scanner;
>>>>>>> ^~~~~~~~~
>>>>>>> /usr/brlcad/src/other/stepcode/src/express/express.c: In function
>>>>>>> ‘PARSERrun’:
>>>>>>> /usr/brlcad/src/other/stepcode/src/express/express.c:621:5: error:
>>>>>>> unknown type name ‘perplex_t’
>>>>>>> perplex_t scanner = perplexFileScanner( fp );
>>>>>>> ^~~~~~~~~
>>>>>>> src/other/stepcode/src/express/CMakeFiles/express.dir/build.make:529:
>>>>>>> recipe for target 'src/other/stepcode/src/expres
>>>>>>> s/CMakeFiles/express.dir/express.c.o' failed
>>>>>>> make[2]: *** [src/other/stepcode/src/expres
>>>>>>> s/CMakeFiles/express.dir/express.c.o] Error 1
>>>>>>> CMakeFiles/Makefile2:4685: recipe for target
>>>>>>> 'src/other/stepcode/src/express/CMakeFiles/express.dir/all' failed
>>>>>>> make[1]: *** [src/other/stepcode/src/express/CMakeFiles/express.dir/all]
>>>>>>> Error 2
>>>>>>> Makefile:160: recipe for target 'all' failed
>>>>>>> make: *** [all] Error 2
>>>>>>>
>>>>>>
>>>>>> Also, the link you mentioned https://developer.amd.com/amd-
>>>>>> accelerated-parallel-processing-app-sdk/ doesn't exist as of now.
>>>>>>
>>>>>> I've started with converting the HYP shot routine and will check its
>>>>>> performance once my working development environment develops.
>>>>>>
>>>>>>
>>>>>> Also, I went through the instructions to be followed and will make it
>>>>>> a point to give updates more frequently. Meanwhile, I had a few queries,
>>>>>> both general and specific:
>>>>>> - For acceptance as mentioned here
>>>>>> <http://brlcad.org/wiki/Summer_of_Code/Acceptance>, is there a
>>>>>> specific format (eg. in hard copy) or just a general mail in writing
>>>>>> would
>>>>>> do?
>>>>>> - For daily updates, do I start a new thread with just my mentor and
>>>>>> org-admin or in the group (also, in gsocax or in BRL-CAD developer
>>>>>> mailing
>>>>>> list?)
>>>>>> - Would you prefer mail or other communication channel for daily
>>>>>> update? And any preferred timings for interaction?
>>>>>>
>>>>>> Warm Regards,
>>>>>>
>>>>>> *Sreyansh Kumhar Jain*
>>>>>> 4th Year Undergraduate Student
>>>>>> Department of Mechanical Engineering
>>>>>> Indian Institute of Technology, Kharagpur
>>>>>> *+91-9933958066*
>>>>>>
>>>>>> sreyanshjai...@gmail.com
>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>
>>>>>> On Mon, Mar 26, 2018 at 8:42 AM, Sreyansh Jain <
>>>>>> sreyanshjai...@gmail.com> wrote:
>>>>>>
>>>>>>> @Sean - Disabling bundled build does help a lot if not completely.
>>>>>>>
>>>>>>> @Vasco - Thank you for the detailed instructions. While working with
>>>>>>> r30379 version on Ubuntu 16.04, I got the following few errors as
>>>>>>> mentioned
>>>>>>> in the list attached. I've mentioned both 'make' and 'make -j4' results
>>>>>>> with the hope of better understanding. While I try to tweak the code a
>>>>>>> bit
>>>>>>> to make it work (like using expscan.h file content), it somehow leads to
>>>>>>> even more errors. Any clue? I'll now try doing these on Ubuntu 17.04 the
>>>>>>> way you mentioned.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Also, since the deadline is approaching regarding the final proposal
>>>>>>> submission, do let me know if there are any changes to be made in the
>>>>>>> rough
>>>>>>> draft I submitted.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Warm Regards,
>>>>>>>
>>>>>>> *Sreyansh Kumhar Jain*
>>>>>>> 4th Year Undergraduate Student
>>>>>>> Department of Mechanical Engineering
>>>>>>> Indian Institute of Technology, Kharagpur
>>>>>>> *+91-9933958066*
>>>>>>>
>>>>>>> sreyanshjai...@gmail.com
>>>>>>> Facebook <https://www.facebook.com/sreyansh.sonu> | LinkedIn
>>>>>>> <https://www.linkedin.com/in/sreyansh-kumhar-jain-a61428104/>
>>>>>>>
>>>>>>> On Sat, Mar 24, 2018 at 9:46 AM, Christopher Sean Morrison <
>>>>>>> brl...@mac.com> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mar 21, 2018, at 11:22 AM, Sreyansh Jain <
>>>>>>>> sreyanshjai...@gmail.com> wrote:
>>>>>>>>
>>>>>>>> I've tried symlinking awk to both gawk(4.1.3) and mawk, but I still
>>>>>>>> get the same error. I'm using Ubuntu 16.04.
>>>>>>>>
>>>>>>>> Also, I've made the changes in the proposal. Now that I'm aware
>>>>>>>> roughly about the tasks to be done, I think it's better to stick to
>>>>>>>> either
>>>>>>>> one of BOT plate mode or BREP support. If time permits, I'll do the
>>>>>>>> other.
>>>>>>>> I'll do a bit of detailed background study in both cases to check
>>>>>>>> which one
>>>>>>>> should be plausible in the given time frame and update it in the
>>>>>>>> proposal
>>>>>>>> accordingly.
>>>>>>>>
>>>>>>>>
>>>>>>>> There’s apparently some issue with our bundled libpng sources on
>>>>>>>> your system. Does disabling bundled build work? We usually recommend
>>>>>>>> bundled for simplicity, but the default should work too.
>>>>>>>> Delete/Recreate
>>>>>>>> your build directory, then reconfigure:
>>>>>>>>
>>>>>>>> cd to the brlcad sources directory
>>>>>>>> rm -rf build
>>>>>>>> mkdir build
>>>>>>>> cd build
>>>>>>>> cmake .. -DCMAKE_BUILD_TYPE=Release -DBRLCAD_ENABLE_OPENCL=ON
>>>>>>>> make
>>>>>>>>
>>>>>>>> Cheers!
>>>>>>>> Sean
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------------------------------
>>>>>>>> ------------------
>>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>>> _______________________________________________
>>>>>>>> BRL-CAD Developer mailing list
>>>>>>>> brlcad-devel@lists.sourceforge.net
>>>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------
>>>>>> ------------------
>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>> _______________________________________________
>>>>>> BRL-CAD Developer mailing list
>>>>>> brlcad-devel@lists.sourceforge.net
>>>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Vasco Alexandre da Silva Costa
>>>>> PhD in Computer Engineering (Computer Graphics)
>>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Vasco Alexandre da Silva Costa
>>>> PhD in Computer Engineering (Computer Graphics)
>>>> Instituto Superior Técnico/University of Lisbon, Portugal
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> BRL-CAD Developer mailing list
>>>> brlcad-devel@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>>
>>>>
>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> BRL-CAD Developer mailing list
>>> brlcad-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>>
>>>
>>
>>
>> --
>> Vasco Alexandre da Silva Costa
>> PhD in Computer Engineering (Computer Graphics)
>> Instituto Superior Técnico/University of Lisbon, Portugal
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> BRL-CAD Developer mailing list
>> brlcad-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>>
>>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> BRL-CAD Developer mailing list
> brlcad-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>
>
--
Vasco Alexandre da Silva Costa
PhD in Computer Engineering (Computer Graphics)
Instituto Superior Técnico/University of Lisbon, Portugal
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
BRL-CAD Developer mailing list
brlcad-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-devel
