On 4 Mar 2008, at 17:51, Nigel Stanley wrote:
> I thought I'd probably use Hammarite on the base as that copes with
> non-flaky rust quite well (probably geting cancer in the process with
> all that toluene in a confined space), and the usual
> oxide/undercoat/gloss up the sides (which are much less of a problem).
>
Mike Carter, our BSC surveyor, recommends Comastic blacking on the
bottom of the locker, with a piece of roofing felt placed over it
before it dries, thus providing a cushion against the abrasion from the
base of the cylinders.
When it wears through, stick another piece in.
––
All the best
Bruce
"Never stay up on the barren heights of cleverness, but come down into
the green valleys of silliness.” Ludwig Wittgenstein
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/canals-list/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/canals-list/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
