Cool... I'll try SL_ParamUnknown.
I'm running Matlab 2007b with 10.1; I'm assuming that the problem
is caused by the libraries having been saved with a newer/Linux
Simulink for 11.x.
On a somewhat related note, has anybody downloaded 12.1 yet?
Thanks,
Henry
On 5/4/2010 5:39 PM, Billy Mallard wrote:
Henry Chen wrote:
Has anybody discovered the magic command to disable the warnings for
"In instantiating linked block *: ... Block block doses not have a
a parameter '---'" that's crept in since the partial migration to 11.x?
I get this warning per block that gets accessed. I just tried putting
in an FFT block, and it's been spewing warnings for a pretty solid 5
minutes.
Hi Henry,
Have you tried disabling the SL_ParamUnknown warning?
I'd test it, but i can't replicate what you're describing. I created an
empty model and dropped in an fft block. No warnings. So i dropped in
all three other types of fft blocks. Still no warnings. Then i changed
their fft sizes so that they'd all redraw. Still no warnings.
I'm running the latest versions of MSSGE in RHEL5, and i'm testing with
the latest revs of all casper libraries. What are you running?
Billy
