To all those interested, The Matlab command warning on verbose gives more information about all warnings, including its identifier and how to disable it, place it in your startup.m file to identify the warnings to remove using warning off ...
Using this I have added the following lines to my startup.m file (before the load_system(... lines) to disable most of the superfluous warnings warning off Simulink:SL_LoadMdlParameterizedLink warning off Simulink:SL_OutputNotConnected warning off Simulink:SL_LoadMdlLoadError Hope this makes things more pleasant Regards Andrew On 5 May 2010 02:44, Henry Chen <[email protected]> wrote: > Cool... I'll try SL_ParamUnknown. > > I'm running Matlab 2007b with 10.1; I'm assuming that the problem > is caused by the libraries having been saved with a newer/Linux > Simulink for 11.x. > > On a somewhat related note, has anybody downloaded 12.1 yet? > > Thanks, > Henry > > > On 5/4/2010 5:39 PM, Billy Mallard wrote: > >> Henry Chen wrote: >> >>> Has anybody discovered the magic command to disable the warnings for >>> "In instantiating linked block *: ... Block block doses not have a >>> a parameter '---'" that's crept in since the partial migration to 11.x? >>> >>> I get this warning per block that gets accessed. I just tried putting >>> in an FFT block, and it's been spewing warnings for a pretty solid 5 >>> minutes. >>> >> >> Hi Henry, >> >> Have you tried disabling the SL_ParamUnknown warning? >> >> I'd test it, but i can't replicate what you're describing. I created an >> empty model and dropped in an fft block. No warnings. So i dropped in >> all three other types of fft blocks. Still no warnings. Then i changed >> their fft sizes so that they'd all redraw. Still no warnings. >> >> I'm running the latest versions of MSSGE in RHEL5, and i'm testing with >> the latest revs of all casper libraries. What are you running? >> >> Billy >> > >
