Hi Wes, I just updated to the latest libraries. Great work! I am looking forward to using those. I have a quick question. Does ten_Gbe_v2 block support Roach2? The "port" parameter on the yellow block can be set to between 0 and 3. I understand that Roach 2 will have 6 CX4 ports (3 each per mezzanine card). How does that map to the yellow block?
Also, I remember from the casper workshop that there was going to be a setting to select between CX4 and SFP+ connection. Do you know what's the status with that? Thanks, Nimish On Wed, Oct 3, 2012 at 8:10 AM, Andrew Martens <[email protected]> wrote: > Hi Dave, Wes > > We could probably write a little Wishbone-to-OPB module and plug that in > front of the OPB yellow blocks for some things. Messing with the > internals of yellow blocks that we don't have hardware for could be > dangerous e.g ADCs. Ideally people would help out with yellow blocks > they have hardware for and have expertise in. > > Regards > Andrew > > On Wed, 2012-10-03 at 13:29 +0200, Wesley New wrote: > > Hi Dave, > > > > > > Unfortunately the move to wishbone will need to be done en mass. > > > > > > Wes > > > > On Thu, Sep 27, 2012 at 7:40 PM, David MacMahon > > <[email protected]> wrote: > > Hi, Wes, > > > > Are you converting all yellow blocks to wishbone en masse or > > can they be converted one by one over time? > > > > Thanks, > > Dave > > > > On Sep 27, 2012, at 10:23 AM, Wesley New wrote: > > > > > Hi Rurik > > > > > > These updates don't contain the wishbone port, that is the > > next item > > > on my to-do list. > > > > > > Wes > > > > > > On 9/27/12, Rurik A. Primiani <[email protected]> > > wrote: > > >> Hi Wes, > > >> > > >> Great work! I look forward to using the newer tools. Just a > > quick > > >> question, does this update include the migration to the > > Wishbone bus > > >> discussed at the workshop? > > >> > > >> Best, > > >> Rurik > > >> > > >> On 9/26/12 9:01 AM, Wesley New wrote: > > >>> Good Day all, > > >>> > > >>> We have updated the existing MSSGE toolflow to work with > > the Xilinx 14.2 > > >>> tools and Matlab2012a. I have provided a wikipage with all > > the details > > >>> and how to get an environment setup, available at: > > >>> > > > https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.2_and_Matlab_2012a > > >>> > > >>> > > >>> The ska-sa mlib_devel repository currently hosts these > > changes and can > > >>> be found at: https://github.com/ska-sa/mlib_devel. So feel > > free to start > > >>> using the latest tools and post any issues/feeback to the > > mailing list. > > >>> > > >>> Thanks > > >>> > > >>> Wesley > > >> > > > > > > > > > > > > > > >
