Mark, This is bwrc repo or ska-sa? I am using ska-sa and could not find it.
Thanks, Nimish On Oct 5, 2012, at 6:01 PM, Mark Wagner <[email protected]> wrote: Hi Nimish, If you pull the new 10gbe_v2 yellowblock from the most recent repo, all of those options should be available - sfp+, roach2, etc. Mark On Fri, Oct 5, 2012 at 2:57 PM, Nimish Sane <[email protected]> wrote: > Hi Wes, > > I just updated to the latest libraries. Great work! I am looking forward > to using those. I have a quick question. Does ten_Gbe_v2 block support > Roach2? The "port" parameter on the yellow block can be set to between 0 > and 3. I understand that Roach 2 will have 6 CX4 ports (3 each per > mezzanine card). How does that map to the yellow block? > > Also, I remember from the casper workshop that there was going to be a > setting to select between CX4 and SFP+ connection. Do you know what's the > status with that? > > Thanks, > > Nimish > > On Wed, Oct 3, 2012 at 8:10 AM, Andrew Martens <[email protected]> wrote: > >> Hi Dave, Wes >> >> We could probably write a little Wishbone-to-OPB module and plug that in >> front of the OPB yellow blocks for some things. Messing with the >> internals of yellow blocks that we don't have hardware for could be >> dangerous e.g ADCs. Ideally people would help out with yellow blocks >> they have hardware for and have expertise in. >> >> Regards >> Andrew >> >> On Wed, 2012-10-03 at 13:29 +0200, Wesley New wrote: >> > Hi Dave, >> > >> > >> > Unfortunately the move to wishbone will need to be done en mass. >> > >> > >> > Wes >> > >> > On Thu, Sep 27, 2012 at 7:40 PM, David MacMahon >> > <[email protected]> wrote: >> > Hi, Wes, >> > >> > Are you converting all yellow blocks to wishbone en masse or >> > can they be converted one by one over time? >> > >> > Thanks, >> > Dave >> > >> > On Sep 27, 2012, at 10:23 AM, Wesley New wrote: >> > >> > > Hi Rurik >> > > >> > > These updates don't contain the wishbone port, that is the >> > next item >> > > on my to-do list. >> > > >> > > Wes >> > > >> > > On 9/27/12, Rurik A. Primiani <[email protected]> >> > wrote: >> > >> Hi Wes, >> > >> >> > >> Great work! I look forward to using the newer tools. Just a >> > quick >> > >> question, does this update include the migration to the >> > Wishbone bus >> > >> discussed at the workshop? >> > >> >> > >> Best, >> > >> Rurik >> > >> >> > >> On 9/26/12 9:01 AM, Wesley New wrote: >> > >>> Good Day all, >> > >>> >> > >>> We have updated the existing MSSGE toolflow to work with >> > the Xilinx 14.2 >> > >>> tools and Matlab2012a. I have provided a wikipage with all >> > the details >> > >>> and how to get an environment setup, available at: >> > >>> >> > >> https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.2_and_Matlab_2012a >> > >>> >> > >>> >> > >>> The ska-sa mlib_devel repository currently hosts these >> > changes and can >> > >>> be found at: https://github.com/ska-sa/mlib_devel. So feel >> > free to start >> > >>> using the latest tools and post any issues/feeback to the >> > mailing list. >> > >>> >> > >>> Thanks >> > >>> >> > >>> Wesley >> > >> >> > > >> > >> > >> > >> > >> >> >> >> >
