Hi,
I'm trying to write a DVD-RW on a Sony DW-U10A with dvdrecord. I know
this is a so called "unofficial" version, but because there's no binary
for Linux Alpha of cdrecord-prodvd, i have no choice.
Below is the output of dvdrecord.
What does that sense-error mean in plain english?
I also tried to burn a disc with dvd+rw-tools (version 5.7.4.4.4), but
this fails to (see output below).
I've tried to burn an ordinary cd-rw on the drive with cdrecord and this
works just fine.
BTW: Blanking a DVD-RW with dvdrecord also works just fine.
Any help would be greatly appreciated.
------------------------------------------------------------------------
----------------------------------
Uname output is:
[EMAIL PROTECTED] cdrecord]# uname -a
Linux Alpha 2.4.9-32 #1 Fri Jun 7 19:00:17 EDT 2002 alpha unknown
------------------------------------------------------------------------
----------------------------------
[EMAIL PROTECTED] cdrecord]# ./dvdrecord dev=2,1,0 speed=1 -dummy -v -dao
/mydocs/forcdr/za_image.iso
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <[EMAIL PROTECTED]>
This program is free software; you can redistribute it and/or modify it
under
the terms of the GNU General Public License as published by the Free
Software
Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more
details.
You should have received a copy of the GNU General Public License along
with
this program; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (alphaev56-unknown-linux-gnu) Copyright (C) 1995-2001
J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '2,1,0'
scsibus: 2 target: 1 lun: 0
Linux sg driver version: 3.1.20
Using libscg version 'bero-0.5a'
./dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J.
Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DW-U10A '
Revision : '1.1d'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 4718592 = 4608 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 4477 MB
Total size: 5142 MB (509:27.74) = 2292581 sectors
Lout start: 5142 MB (509:29/56) = 2292581 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 5915
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation
starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Sending CUE sheet...
Starting new track at sector: 2292758
Track 01: 0 of 4477 MB written../dvdrecord: Input/output error.
write_g1: scsi sendcmd: no error
CDB: 2A 00 00 22 FC 16 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.009s timeout 200s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
Writing time: 5.028s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.001s
./dvdrecord: fifo had 64 puts and 1 gets.
./dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
[EMAIL PROTECTED] cdrecord]#
------------------------------------------------------------------------
----------------------------
[EMAIL PROTECTED] dvd+rw-tools-5.7.4.4.4]# ./growisofs -Z
/dev/dvdrw=/mydocs/forcdr/za_image.iso
Executing 'builtin_dd if=/mydocs/forcdr/za_image.iso of=/dev/dvdrw
obs=32k seek=0'
0/4695205888 ( 0.0%) @0x, remaining ??:??
0/4695205888 ( 0.0%) @0x, remaining ??:??
:-[ LBA=0h, SENSE KEY=5h/ASC=64h/ASCQ=00h ]
:-[ attempt -blank=full ]
:-( write failed: Invalid argument
------------------------------------------------------------------------
----------------------------
Greetings,
Marc
(Please remove the NOSPAM from my email if you reply)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
