On Fri, 26 Jun 2015, Dave Taht wrote:
Yes, but I am unsure from looking at the driver that using ethtool on the egress on the wrt1200ac will actually work, but pretty sure it will work if you set it on the server. feel free to try both. :)
I set speed 100 on my switch and did some new tests, I left SQM at 500M, don't know what happens then, thought it was worthwile to test? Remember, now I don't have fq_codel in the server->client direction, but there it's an low buffered switchport that is doing the rate adaptation.
Btw, now I am running a nightly build that I compiled for myself for the WRT1200AC, so if there is anything you would like me to try to change in the mvneta driver, I can certainly test that. I can do serial console access to the WRT1200AC if needed as well, I already "unbricked" it once.
Btw, disregard the title in the flent files, I just realised I forgot to change the title argument. This is without iperf3, with SQM set to 500M, but eth0 at 100megabit/full duplex.
http://swm.pp.se/aqm/wrt1200ac-150627-100m-sqm.tar -- Mikael Abrahamsson email: [email protected] _______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
