That's old school :)
Most dents that can be pulled can be done with a suction cup now. Anything
I can't do with a suction cup is going to get new metal, even something
fabricated if needed, bondo is da ass. Plus easy to detect on resale.
--
Timothy Heald
Web Portfolio Manager
Overseas Security Advisory Council
U.S. Department of State
571.345.2319
The opinions expressed here do not necessarily reflect those of the U.S.
Department of State or any affiliated organization(s). Nor have these
opinions been approved or sanctioned by these organizations. This e-mail is
unclassified based on the definitions in E.O. 12958.
-----Original Message-----
From: Doug White [mailto:[EMAIL PROTECTED]
Sent: Sunday, February 08, 2004 11:50 AM
To: CF-Community
Subject: Re: car question
Wasn't putting you down.
You then realize that many dents are removed by drilling in the center,
inserting a :come-along" and then pulling it out. Then filling the hose
with
Solder or Bondo and refinishing as needed. :-)
======================================
Stop spam on your domain, Anti-spam solutions
http://www.clickdoug.com/mailfilter.cfm
<http://www.clickdoug.com/mailfilter.cfm>
For hosting solutions http://www.clickdoug.com <http://www.clickdoug.com>
======================================
Aspire to Inspire before you Retire or Expire!
----- Original Message -----
From: Erika L Walker-Arnold
To: CF-Community
Sent: Sunday, February 08, 2004 10:39 AM
Subject: RE: car question
As the daughter of a mother/step-father who opened up their own Auto
Body shop and ran it for many years ... This is actually not just a job
for the "professionals" ... I've done it many times myself over the
years with other various vehicles and I've even replaced my own gas tank
on a Chevy Chevette, laying in the driveway of the house I was living in
at the time!!!
Do-it-yourself car repair on dents and whatnot is very satisfying and
not at all dangerous or difficult depending on what the task is. I've
even been a aprt of rebuilding motors from scratch. From tractors to
cars to dump trucks and 18-wheelers.
I have helped gut the interior of many cars. As long as you keep
detailed notes on where the nuts and bolts go back to, then it's a
fairly simple straight forward job.
It just may take some time learning where some things are :D
Cheers,
Erika
>>| -----Original Message-----
>>| From: Doug White
>>|
>>| Otherwise it is a task of removing the interior to
>>| gain access, and that is best left to the professionals.
_____
[Todays Threads] [This Message] [Subscription] [Fast Unsubscribe] [User Settings]
