Gregory Boehnlein <> wrote on Wednesday, April 09, 2008 9:19 PM: > Hello, > We have a 7206 running (C7200-IK9S-M), Version 12.3(20), RELEASE > SOFTWARE (fc2). We are trying to get LLQ implemented on Virtual > Template interfaces for our PPPoE DSL users: > > vpdn-group akrnaa01rr > description SBC Akron VPDN Group > accept-dialin > protocol l2tp > virtual-template 1 > terminate-from hostname akrnaa01rr.oh.AADS > local name xxxxxx > lcp renegotiation always > l2tp tunnel password 7 xxxxxxxxxxx
QoS for L2TP users is not supported in your release, you need 12.2SB, take a look at the "Per-Session QoS" feature at http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbbbrs1b.html > interface Virtual-Template1 > mtu 1492 > ip unnumbered Loopback1 > rate-limit output access-group 102 8000 1500 2000 conform-action > transmit exceed-action drop > no ip route-cache cef > no ip route-cache Disabling CEF is always a bad idea, but > compress stac causes all your traffic to be process switched anyway. You don't want to use compression on anything faster than ISDN/64k, it doesn't scale.. oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
