Gregory Boehnlein <mailto:[EMAIL PROTECTED]> wrote on Thursday, April 10, 2008 3:13 PM:
>>> Hello, >>> We have a 7206 running (C7200-IK9S-M), Version 12.3(20), RELEASE >>> SOFTWARE (fc2). We are trying to get LLQ implemented on Virtual >>> Template interfaces for our PPPoE DSL users: >>> >>> vpdn-group akrnaa01rr >>> description SBC Akron VPDN Group >>> accept-dialin >>> protocol l2tp >>> virtual-template 1 >>> terminate-from hostname akrnaa01rr.oh.AADS >>> local name xxxxxx >>> lcp renegotiation always >>> l2tp tunnel password 7 xxxxxxxxxxx >> >> QoS for L2TP users is not supported in your release, you need 12.2SB, >> take a look at the "Per-Session QoS" feature at >> http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbbbrs1b.html > > Excellent. Thank you very much. What does the "SB" designation stand > for? Hmm, I would guess SP Broadband.. ;) >>> interface Virtual-Template1 >>> mtu 1492 >>> ip unnumbered Loopback1 >>> rate-limit output access-group 102 8000 1500 2000 conform-action >>> transmit exceed-action drop no ip route-cache cef >>> no ip route-cache >> >> Disabling CEF is always a bad idea, but >> >>> compress stac >> >> causes all your traffic to be process switched anyway. You don't want >> to use compression on anything faster than ISDN/64k, it doesn't >> scale.. > > That looks to be a holdover from the old ISDN template that this was > converted from. I'll consider removing STAC compression from the mix. and please re-enable CEF and ip route-cache on the vtemplate. oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
