> > Hello, > > We have a 7206 running (C7200-IK9S-M), Version 12.3(20), RELEASE > > SOFTWARE (fc2). We are trying to get LLQ implemented on Virtual > > Template interfaces for our PPPoE DSL users: > > > > vpdn-group akrnaa01rr > > description SBC Akron VPDN Group > > accept-dialin > > protocol l2tp > > virtual-template 1 > > terminate-from hostname akrnaa01rr.oh.AADS > > local name xxxxxx > > lcp renegotiation always > > l2tp tunnel password 7 xxxxxxxxxxx > > QoS for L2TP users is not supported in your release, you need 12.2SB, > take a look at the "Per-Session QoS" feature at > http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbbbrs1b.html
Excellent. Thank you very much. What does the "SB" designation stand for? > > interface Virtual-Template1 > > mtu 1492 > > ip unnumbered Loopback1 > > rate-limit output access-group 102 8000 1500 2000 conform-action > > transmit exceed-action drop > > no ip route-cache cef > > no ip route-cache > > Disabling CEF is always a bad idea, but > > > compress stac > > causes all your traffic to be process switched anyway. You don't want > to use compression on anything faster than ISDN/64k, it doesn't scale.. That looks to be a holdover from the old ISDN template that this was converted from. I'll consider removing STAC compression from the mix. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
