Hello John, Based on your posting, the sup in slot 5 is in STANDBY state, so no worries to have :-)
FYI : https://supportforums.cisco.com/docs/DOC-4068/version/1;jsessionid=667B4E9940D21005AC46FD72F7A602B9.node0 Good luck ! Y. 2010/3/25 John Smith <[email protected]> > We have a 6500 Switch in our network with two SUP720 engines running in SSO > mode; one engine is Active and the other is in Standby Hot. The Sup engines > are in slot 5 and slot 6. We need to replace the card in Slot 5. > > Does anyone have a step by step procedure and/or web link on how to replace > the redundant supervisor card without rebooting the chassis. > > Any/all help is much appreciated. Thank you. > > We have the following config for the supervisors. > > ! > redundancy > mode sso > main-cpu > auto-sync running-config > auto-sync standard > ! > > Switch#show redundancy > Redundant System Information : > ------------------------------ > Available system uptime = 2 year, 7 weeks, 3 days, 8 hours, 33 > minutes > Switchovers system experienced = 0 > Standby failures = 0 > Last switchover reason = none > > Hardware Mode = Duplex > Configured Redundancy Mode = sso > Operating Redundancy Mode = sso > Maintenance Mode = Disabled > Communications = Up > > Current Processor Information : > ------------------------------- > Active Location = slot 6 > Current Software state = ACTIVE > Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32 > minutes > Image Version = Cisco Internetwork Operating System > Software > IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version > 12.2(18)SXF7, RELEASE SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2006 by cisco Systems, Inc. > Compiled Thu 23-Nov-06 06:00 by kellythw > BOOT = disk0:,1; > CONFIG_FILE = > BOOTLDR = > Configuration register = 0x2102 > > Peer Processor Information : > ---------------------------- > Standby Location = slot 5 > Current Software state = STANDBY HOT > Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32 > minutes > Image Version = Cisco Internetwork Operating System > Software > IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version > 12.2(18)SXF7, RELEASE SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2006 by cisco Systems, Inc. > Compiled Thu 23-Nov-06 06:00 by kellythw > BOOT = disk0:,1; > CONFIG_FILE = > BOOTLDR = > Configuration register = 0x2102 > > > Thanks! > -John- > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Youssef BENGELLOUN-ZAHR ……………………………………………… Ingénieur Réseaux et Télécoms Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE Tel +33 (0) 825 000 720 Tel. direct +33 (0) 1 77 35 59 14 Tel. portable +33 (0) 6 22 42 63 80 Email [email protected] ……………………………………………………………………………….....www.720.fr _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
