Also, check out this : http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a008086ed2e.shtml
Y. 2010/3/25 Youssef Bengelloun-Zahr <[email protected]> > Hello John, > > Based on your posting, the sup in slot 5 is in STANDBY state, so no worries > to have :-) > > FYI : > > > https://supportforums.cisco.com/docs/DOC-4068/version/1;jsessionid=667B4E9940D21005AC46FD72F7A602B9.node0 > > Good luck ! > > Y. > > > > 2010/3/25 John Smith <[email protected]> > > We have a 6500 Switch in our network with two SUP720 engines running in SSO >> mode; one engine is Active and the other is in Standby Hot. The Sup engines >> are in slot 5 and slot 6. We need to replace the card in Slot 5. >> >> Does anyone have a step by step procedure and/or web link on how to >> replace the redundant supervisor card without rebooting the chassis. >> >> Any/all help is much appreciated. Thank you. >> >> We have the following config for the supervisors. >> >> ! >> redundancy >> mode sso >> main-cpu >> auto-sync running-config >> auto-sync standard >> ! >> >> Switch#show redundancy >> Redundant System Information : >> ------------------------------ >> Available system uptime = 2 year, 7 weeks, 3 days, 8 hours, 33 >> minutes >> Switchovers system experienced = 0 >> Standby failures = 0 >> Last switchover reason = none >> >> Hardware Mode = Duplex >> Configured Redundancy Mode = sso >> Operating Redundancy Mode = sso >> Maintenance Mode = Disabled >> Communications = Up >> >> Current Processor Information : >> ------------------------------- >> Active Location = slot 6 >> Current Software state = ACTIVE >> Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32 >> minutes >> Image Version = Cisco Internetwork Operating System >> Software >> IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version >> 12.2(18)SXF7, RELEASE SOFTWARE (fc1) >> Technical Support: http://www.cisco.com/techsupport >> Copyright (c) 1986-2006 by cisco Systems, Inc. >> Compiled Thu 23-Nov-06 06:00 by kellythw >> BOOT = disk0:,1; >> CONFIG_FILE = >> BOOTLDR = >> Configuration register = 0x2102 >> >> Peer Processor Information : >> ---------------------------- >> Standby Location = slot 5 >> Current Software state = STANDBY HOT >> Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32 >> minutes >> Image Version = Cisco Internetwork Operating System >> Software >> IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version >> 12.2(18)SXF7, RELEASE SOFTWARE (fc1) >> Technical Support: http://www.cisco.com/techsupport >> Copyright (c) 1986-2006 by cisco Systems, Inc. >> Compiled Thu 23-Nov-06 06:00 by kellythw >> BOOT = disk0:,1; >> CONFIG_FILE = >> BOOTLDR = >> Configuration register = 0x2102 >> >> >> Thanks! >> -John- >> >> >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > > > -- > Youssef BENGELLOUN-ZAHR ……………………………………………… > Ingénieur Réseaux et Télécoms > > > Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > Tel +33 (0) 825 000 720 > Tel. direct +33 (0) 1 77 35 59 14 > Tel. portable +33 (0) 6 22 42 63 80 > Email [email protected] > ……………………………………………………………………………….....www.720.fr > > -- Youssef BENGELLOUN-ZAHR ……………………………………………… Ingénieur Réseaux et Télécoms Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE Tel +33 (0) 825 000 720 Tel. direct +33 (0) 1 77 35 59 14 Tel. portable +33 (0) 6 22 42 63 80 Email [email protected] ……………………………………………………………………………….....www.720.fr _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
