John- You want it to boot the software you've already got up and running, so make a copy of the IOS onto some compact flash. When you insert the redundant Sup, have a console cable and terminal already connected so that you can monitor its boot process. Once you see the Sup's memory displayed, CTRL+BREAK and get to ROMMON. Then, tell it to boot that IOS you want from the compact flash disk. If it boots correctly, you'll see console switch to its MSFC and then [once booted] it'll download the config from the active Sup and you'll be up and running. At that point, you'll want to move the console to your active Sup and make sure that your standby Sup's bootflash or bootdisk contains the IOS 12.2(18)SXF7 that you want. If not, make the appropriate file copies from the active Sup's bootflash or bootdisk. (i.e. copy sup-bootlfash:xxx.bin slavesup-bootflash:xxx.bin)
That's the short...I'm sure those links would help as well. -- Stephen F. Cobb • Senior Sales Engineer CCNA/CCDA/DCNID/CSE/ASP/ATSA Telecoast Communications, LLC • Santa Barbara, CA o 877.677.1182 x272 • c 760.807.0570 • f 805.618.1610 aim/yahoo telecoaststephen On Thu, Mar 25, 2010 at 3:07 PM, John Smith <[email protected]> wrote: > Greetings, > > To all who responded to my query ... > > Thank you for your responses. I appreciate it. I have couple more > questions. > > Do I need to do anything with the SSO or Redundancy config before I remove > the bad Sup module in Slot 5 and insert in the new module? > > The new module is coming from Cisco, so I have no idea what IOS it will > have on it. We do not have a spare chassis to stage the new module coming > from Cisco. > > Will the IOS and Config automatically sync with the Active module in slot 6 > when I insert the new/replacement module in slot 5. > > Thanks again for all your help. I very much appreciate it. > > Thanks! > -John- > > --- On Thu, 3/25/10, Youssef Bengelloun-Zahr <[email protected]> wrote: > > > From: Youssef Bengelloun-Zahr <[email protected]> > Subject: Re: [c-nsp] Replacing redundant Sup720 on Catalyst 6500 > To: "John Smith" <[email protected]> > Cc: [email protected] > Date: Thursday, March 25, 2010, 4:54 PM > > > P.S : > > As I said before, make sure you are replacing the STANDBY SUP, not the > active one (unless NSF is configured for your IGPs, etc...). > > Y. > > > > > 2010/3/25 Youssef Bengelloun-Zahr <[email protected]> > > Also, check out this : > > > http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a008086ed2e.shtml > > Y. > > > > > 2010/3/25 Youssef Bengelloun-Zahr <[email protected]> > > > > > Hello John, > > Based on your posting, the sup in slot 5 is in STANDBY state, so no worries > to have :-) > > FYI : > > > https://supportforums.cisco.com/docs/DOC-4068/version/1;jsessionid=667B4E9940D21005AC46FD72F7A602B9.node0 > > Good luck ! > > Y. > > > > > 2010/3/25 John Smith <[email protected]> > > > > > We have a 6500 Switch in our network with two SUP720 engines running in SSO > mode; one engine is Active and the other is in Standby Hot. The Sup engines > are in slot 5 and slot 6. We need to replace the card in Slot 5. > > Does anyone have a step by step procedure and/or web link on how to replace > the redundant supervisor card without rebooting the chassis. > > Any/all help is much appreciated. Thank you. > > We have the following config for the supervisors. > > ! > redundancy > mode sso > main-cpu > auto-sync running-config > auto-sync standard > ! > > Switch#show redundancy > Redundant System Information : > ------------------------------ > Available system uptime = 2 year, 7 weeks, 3 days, 8 hours, 33 > minutes > Switchovers system experienced = 0 > Standby failures = 0 > Last switchover reason = none > > Hardware Mode = Duplex > Configured Redundancy Mode = sso > Operating Redundancy Mode = sso > Maintenance Mode = Disabled > Communications = Up > > Current Processor Information : > ------------------------------- > Active Location = slot 6 > Current Software state = ACTIVE > Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32 > minutes > Image Version = Cisco Internetwork Operating System > Software > IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version > 12.2(18)SXF7, RELEASE SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2006 by cisco Systems, Inc. > Compiled Thu 23-Nov-06 06:00 by kellythw > BOOT = disk0:,1; > CONFIG_FILE = > BOOTLDR = > Configuration register = 0x2102 > > Peer Processor Information : > ---------------------------- > Standby Location = slot 5 > Current Software state = STANDBY HOT > Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32 > minutes > Image Version = Cisco Internetwork Operating System > Software > IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version > 12.2(18)SXF7, RELEASE SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2006 by cisco Systems, Inc. > Compiled Thu 23-Nov-06 06:00 by kellythw > BOOT = disk0:,1; > CONFIG_FILE = > BOOTLDR = > Configuration register = 0x2102 > > > Thanks! > -John- > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > -- > Youssef BENGELLOUN-ZAHR ……………………………………………… > Ingénieur Réseaux et Télécoms > > > Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > Tel +33 (0) 825 000 720 > Tel. direct +33 (0) 1 77 35 59 14 > Tel. portable +33 (0) 6 22 42 63 80 > Email [email protected] > ……………………………………………………………………………….....www.720.fr > > > > > > > > -- > Youssef BENGELLOUN-ZAHR ……………………………………………… > Ingénieur Réseaux et Télécoms > > > Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > Tel +33 (0) 825 000 720 > Tel. direct +33 (0) 1 77 35 59 14 > Tel. portable +33 (0) 6 22 42 63 80 > Email [email protected] > ……………………………………………………………………………….....www.720.fr > > > > > -- > Youssef BENGELLOUN-ZAHR ……………………………………………… > Ingénieur Réseaux et Télécoms > > > Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > Tel +33 (0) 825 000 720 > Tel. direct +33 (0) 1 77 35 59 14 > Tel. portable +33 (0) 6 22 42 63 80 > Email [email protected] > ……………………………………………………………………………….....www.720.fr > > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
