Same old same. FYI, this kind of problem is solved using UBL (in 12.2(33)SXI IOS I think).
Basicaly, during this kind of maitainance, the new module will download the same IOS, config, etc... from the active one. I read that a few days ago, comes in handy when you stand in the place you are in right now. Good luck. Y. 2010/3/26 Stephen Cobb <[email protected]> > John- > > You want it to boot the software you've already got up and running, so make > a copy of the IOS onto some compact flash. When you insert the redundant > Sup, have a console cable and terminal already connected so that you can > monitor its boot process. Once you see the Sup's memory displayed, > CTRL+BREAK and get to ROMMON. Then, tell it to boot that IOS you want from > the compact flash disk. If it boots correctly, you'll see console switch to > its MSFC and then [once booted] it'll download the config from the active > Sup and you'll be up and running. At that point, you'll want to move the > console to your active Sup and make sure that your standby Sup's bootflash > or bootdisk contains the IOS 12.2(18)SXF7 that you want. If not, make the > appropriate file copies from the active Sup's bootflash or bootdisk. (i.e. > copy sup-bootlfash:xxx.bin slavesup-bootflash:xxx.bin) > > That's the short...I'm sure those links would help as well. > > -- > Stephen F. Cobb • Senior Sales Engineer > CCNA/CCDA/DCNID/CSE/ASP/ATSA > Telecoast Communications, LLC • Santa Barbara, CA > o 877.677.1182 x272 • c 760.807.0570 • f 805.618.1610 > aim/yahoo telecoaststephen > > On Thu, Mar 25, 2010 at 3:07 PM, John Smith <[email protected]> wrote: > > > Greetings, > > > > To all who responded to my query ... > > > > Thank you for your responses. I appreciate it. I have couple more > > questions. > > > > Do I need to do anything with the SSO or Redundancy config before I > remove > > the bad Sup module in Slot 5 and insert in the new module? > > > > The new module is coming from Cisco, so I have no idea what IOS it will > > have on it. We do not have a spare chassis to stage the new module coming > > from Cisco. > > > > Will the IOS and Config automatically sync with the Active module in slot > 6 > > when I insert the new/replacement module in slot 5. > > > > Thanks again for all your help. I very much appreciate it. > > > > Thanks! > > -John- > > > > --- On Thu, 3/25/10, Youssef Bengelloun-Zahr <[email protected]> wrote: > > > > > > From: Youssef Bengelloun-Zahr <[email protected]> > > Subject: Re: [c-nsp] Replacing redundant Sup720 on Catalyst 6500 > > To: "John Smith" <[email protected]> > > Cc: [email protected] > > Date: Thursday, March 25, 2010, 4:54 PM > > > > > > P.S : > > > > As I said before, make sure you are replacing the STANDBY SUP, not the > > active one (unless NSF is configured for your IGPs, etc...). > > > > Y. > > > > > > > > > > 2010/3/25 Youssef Bengelloun-Zahr <[email protected]> > > > > Also, check out this : > > > > > > > http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a008086ed2e.shtml > > > > Y. > > > > > > > > > > 2010/3/25 Youssef Bengelloun-Zahr <[email protected]> > > > > > > > > > > Hello John, > > > > Based on your posting, the sup in slot 5 is in STANDBY state, so no > worries > > to have :-) > > > > FYI : > > > > > > > https://supportforums.cisco.com/docs/DOC-4068/version/1;jsessionid=667B4E9940D21005AC46FD72F7A602B9.node0 > > > > Good luck ! > > > > Y. > > > > > > > > > > 2010/3/25 John Smith <[email protected]> > > > > > > > > > > We have a 6500 Switch in our network with two SUP720 engines running in > SSO > > mode; one engine is Active and the other is in Standby Hot. The Sup > engines > > are in slot 5 and slot 6. We need to replace the card in Slot 5. > > > > Does anyone have a step by step procedure and/or web link on how to > replace > > the redundant supervisor card without rebooting the chassis. > > > > Any/all help is much appreciated. Thank you. > > > > We have the following config for the supervisors. > > > > ! > > redundancy > > mode sso > > main-cpu > > auto-sync running-config > > auto-sync standard > > ! > > > > Switch#show redundancy > > Redundant System Information : > > ------------------------------ > > Available system uptime = 2 year, 7 weeks, 3 days, 8 hours, 33 > > minutes > > Switchovers system experienced = 0 > > Standby failures = 0 > > Last switchover reason = none > > > > Hardware Mode = Duplex > > Configured Redundancy Mode = sso > > Operating Redundancy Mode = sso > > Maintenance Mode = Disabled > > Communications = Up > > > > Current Processor Information : > > ------------------------------- > > Active Location = slot 6 > > Current Software state = ACTIVE > > Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32 > > minutes > > Image Version = Cisco Internetwork Operating System > > Software > > IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version > > 12.2(18)SXF7, RELEASE SOFTWARE (fc1) > > Technical Support: http://www.cisco.com/techsupport > > Copyright (c) 1986-2006 by cisco Systems, Inc. > > Compiled Thu 23-Nov-06 06:00 by kellythw > > BOOT = disk0:,1; > > CONFIG_FILE = > > BOOTLDR = > > Configuration register = 0x2102 > > > > Peer Processor Information : > > ---------------------------- > > Standby Location = slot 5 > > Current Software state = STANDBY HOT > > Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32 > > minutes > > Image Version = Cisco Internetwork Operating System > > Software > > IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version > > 12.2(18)SXF7, RELEASE SOFTWARE (fc1) > > Technical Support: http://www.cisco.com/techsupport > > Copyright (c) 1986-2006 by cisco Systems, Inc. > > Compiled Thu 23-Nov-06 06:00 by kellythw > > BOOT = disk0:,1; > > CONFIG_FILE = > > BOOTLDR = > > Configuration register = 0x2102 > > > > > > Thanks! > > -John- > > > > > > > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > > > -- > > Youssef BENGELLOUN-ZAHR ……………………………………………… > > Ingénieur Réseaux et Télécoms > > > > > > Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > > Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > > Tel +33 (0) 825 000 720 > > Tel. direct +33 (0) 1 77 35 59 14 > > Tel. portable +33 (0) 6 22 42 63 80 > > Email [email protected] > > ……………………………………………………………………………….....www.720.fr > > > > > > > > > > > > > > > > -- > > Youssef BENGELLOUN-ZAHR ……………………………………………… > > Ingénieur Réseaux et Télécoms > > > > > > Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > > Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > > Tel +33 (0) 825 000 720 > > Tel. direct +33 (0) 1 77 35 59 14 > > Tel. portable +33 (0) 6 22 42 63 80 > > Email [email protected] > > ……………………………………………………………………………….....www.720.fr > > > > > > > > > > -- > > Youssef BENGELLOUN-ZAHR ……………………………………………… > > Ingénieur Réseaux et Télécoms > > > > > > Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 > > Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE > > Tel +33 (0) 825 000 720 > > Tel. direct +33 (0) 1 77 35 59 14 > > Tel. portable +33 (0) 6 22 42 63 80 > > Email [email protected] > > ……………………………………………………………………………….....www.720.fr > > > > > > > > > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Youssef BENGELLOUN-ZAHR ……………………………………………… Ingénieur Réseaux et Télécoms Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE Tel +33 (0) 825 000 720 Tel. direct +33 (0) 1 77 35 59 14 Tel. portable +33 (0) 6 22 42 63 80 Email [email protected] ……………………………………………………………………………….....www.720.fr _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
