On 6/21/2010 19:14, Billy Guthrie wrote: > Seth, > > can you post line by line (including creation of the ACL list number) > the commands you are entering?
Just this, loaded via TFTP: 1 ! 2 3 no ipv6 access-list fw-timmy_6-in 4 ipv6 access-list fw-timmy_6-in 5 6 permit ipv6 2607:fe70:0:1::/64 any 7 8 ! 9 10 no ipv6 access-list fw-timmy_6-out 11 ipv6 access-list fw-timmy_6-out 12 13 permit icmp any 2607:fe70:0:1::/64 14 permit tcp any 2607:fe70:0:1::/64 established 15 16 17 permit tcp any host 2607:fe70::1:2c0:f0ff:fe5a:abe8 eq 25 !error 18 permit tcp any host 2620:0:950:1:2c0:f0ff:fe5a:abe8 eq 25 !ok 19 20 ! 21 end > Maybe even a sanitized config? > What IOS version are you running? > 12.2(53)SE2 ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
