The easiest way will actually be to do a snmp write to tell it to
tftp an updated config or config subset.
- jared
On Thu, Sep 08, 2011 at 02:40:23PM -0700, Mike wrote:
> Hello,
>
> I am sure this can be done and am calling on my fellows to help
> light the way!
>
> I have a cisco 2970 switch newly installed in a remote,
> inaccessible location that presently lacks OOB serial access. Due to
> a config error, I cannot telnet into the unit due to missing config
> elements:
>
> Escape character is '^]'.
>
>
> Password required, but none set
> Connection closed by foreign host.
>
>
> I do have, however, a writable snmp community string. So I am
> wondering if it would be possible to update the running config using
> snmp in order to give me telnet access to this unit? It would beat a
> trip back out there and would serve my cisco education well too. So
> how about it, any takers?
>
> Mike-
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Jared Mauch | pgp key available via finger from [email protected]
clue++; | http://puck.nether.net/~jared/ My statements are only mine.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
