Anybody would have a working recipe for routers, specialy 7200? I've been trying the ones posted at Cisco (specially the one where you need several commands) but the final "activate" command gets an error response...
Enviado via iPhone Em 08/09/2011, às 18:44, Mike <[email protected]> escreveu: > Hello, > > I am sure this can be done and am calling on my fellows to help light the > way! > > I have a cisco 2970 switch newly installed in a remote, inaccessible > location that presently lacks OOB serial access. Due to a config error, I > cannot telnet into the unit due to missing config elements: > > Escape character is '^]'. > > > Password required, but none set > Connection closed by foreign host. > > > I do have, however, a writable snmp community string. So I am wondering if > it would be possible to update the running config using snmp in order to give > me telnet access to this unit? It would beat a trip back out there and would > serve my cisco education well too. So how about it, any takers? > > Mike- > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
