Here is my steps: persio.pucci@tacacs:/tftpboot$snmpset -v2c -c COMUNITY 10.20.30.1 > .1.3.6.1.4.1.9.9.96.1.1.1.1.2.200 integer 1 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.2.200 = INTEGER: 1 > persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 > .1.3.6.1.4.1.9.9.96.1.1.1.1.3.200 integer 1 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.3.200 = INTEGER: 1 > persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 > .1.3.6.1.4.1.9.9.96.1.1.1.1.4.200 integer 4 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.4.200 = INTEGER: 4 > persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 > .1.3.6.1.4.1.9.9.96.1.1.1.1.5.200 address 10.10.10.1 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.5.200 = IpAddress: 10.10.10.1 > persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 > .1.3.6.1.4.1.9.9.96.1.1.1.1.6.200 string user > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.6.200 = STRING: "user" > persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 > .1.3.6.1.4.1.9.9.96.1.1.1.1.14.200 integer 4 > Error in packet. > Reason: inconsistentValue (The set value is illegal or unsupported in some > way) > Failed object: SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.14.200
As you can see, the object gets created, but it does not accepts the active command persio.pucci@tacacs:/tftpboot$ snmpwalk -v2c -c COMUNITY 10.20.30.1 > .1.3.6.1.4.1.9.9.96.1.1.1.1 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.2.200 = INTEGER: 1 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.3.200 = INTEGER: 1 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.4.200 = INTEGER: 4 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.5.200 = IpAddress: 10.10.10.1 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.6.200 = STRING: "user" > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.9.200 = INTEGER: 2 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.10.200 = INTEGER: 4 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.11.200 = Timeticks: (1836298009) 212 > days, 12:49:40.09 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.12.200 = Timeticks: (1836302109) 212 > days, 12:50:21.09 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.13.200 = INTEGER: 3 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.14.200 = INTEGER: 1 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.15.200 = INTEGER: 1 > SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.16.200 = STRING: "10.10.10.1" > persio.pucci@tacacs:/tftpboot$ On Fri, Sep 9, 2011 at 10:12 PM, Lee <[email protected]> wrote: > On 9/9/11, Persio Pucci <[email protected]> wrote: > > Anybody would have a working recipe for routers, specialy 7200? I've > > been trying the ones posted at Cisco (specially the one where you need > > several commands) but the final "activate" command gets an error > > response... > > echo "processing $DEV" > echo " delete row 3" > $SNMPSET $community -m CISCO-CONFIG-COPY-MIB $DEV ccCopyEntryRowStatus.3 i > 6 > echo " create row 3 & wait" > $SNMPSET $community -m CISCO-CONFIG-COPY-MIB $DEV ccCopyEntryRowStatus.3 i > 5 > > $SNMPSET $community -m CISCO-CONFIG-COPY-MIB $DEV ccCopyProtocol.3 i 1 > # use tftp > $SNMPSET $community -m CISCO-CONFIG-COPY-MIB $DEV ccCopySourceFileType.3 i > 1 > # 1=networkFile 3=startupConfig 4=runningConfig > $SNMPSET $community -m CISCO-CONFIG-COPY-MIB $DEV ccCopyDestFileType.3 i 4 > # 1=networkFile 3=startupConfig 4=runningConfig > $SNMPSET $community -m CISCO-CONFIG-COPY-MIB $DEV > ccCopyServerAddress.3 a $TFTPHOST > $SNMPSET $community -m CISCO-CONFIG-COPY-MIB $DEV ccCopyFileName.3 s $FILE > $SNMPSET $community -m CISCO-CONFIG-COPY-MIB $DEV > ccCopyNotificationOnCompletion.3 i 1 > # 1: true 2: false > $SNMPSET $community -m CISCO-CONFIG-COPY-MIB $DEV ccCopyEntryRowStatus.3 i > 1 > # make it active > echo "Done!" > > > Regards, > Lee > > > > > > Em 08/09/2011, às 18:44, Mike <[email protected]> > > escreveu: > > > >> Hello, > >> > >> I am sure this can be done and am calling on my fellows to help light > >> the way! > >> > >> I have a cisco 2970 switch newly installed in a remote, inaccessible > >> location that presently lacks OOB serial access. Due to a config error, > I > >> cannot telnet into the unit due to missing config elements: > >> > >> Escape character is '^]'. > >> > >> > >> Password required, but none set > >> Connection closed by foreign host. > >> > >> > >> I do have, however, a writable snmp community string. So I am > wondering > >> if it would be possible to update the running config using snmp in order > >> to give me telnet access to this unit? It would beat a trip back out > there > >> and would serve my cisco education well too. So how about it, any > takers? > >> > >> Mike- > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
