Hi all
I am trying to establish AToM between 7613 and 3600
The module from the 7613 side is 7600 ES+ 20xGE SFP
3600#sh run int vlan 183
interface Vlan183
no ip address
xconnect 172.20.40.7 7232183 encapsulation mpls
7613#sh run int vlan 183
interface Vlan183
no ip address
load-interval 30
xconnect 172.20.40.232 7232183 encapsulation mpls
7613#sh mpls l2transport vc 7232183
Local intf Local circuit Dest address VC ID Status
------------- -------------------------- --------------- ---------- ----------
Vl183 Eth VLAN 183 172.20.40.232 7232183 UP
3600#sh mpls l2transport vc 7232183
Local intf Local circuit Dest address VC ID Status
------------- -------------------------- --------------- ---------- ----------
Vl183 Eth VLAN 183 172.20.40.7 7232183 DOWN
I have tried to configure L3VPN (VRF on both routers and test loopback
interfaces) and it worked fine
Any ideas?
BR,
Mohammad
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
