Hi all According to Cisco TAC , the issue is related to the LDP peering between the 7613 and the 3600 It's based on Vlan not on a routed port and that is what preventing the layer 2 connection from coming up
BR, Mohammad > Date: Thu, 26 Mar 2015 11:41:19 +0100 > From: [email protected] > To: [email protected] > CC: [email protected]; [email protected] > Subject: Re: [c-nsp] AToM > > Dear, > > Perhaps I will say mistakes, but I can read : > > 7613#sh mpls l2transport vc 7232183 detail > Local interface: Vl183 up, line protocol up, Eth VLAN 183 up > Interworking type is Ethernet > Destination address: 172.20.40.232, VC ID: 7232183, VC status: up > Output interface: none, imposed label stack {} > Preferred path: not configured > Default path: active > No adjacency > > => For me it is not correct. > > On your 3600 : > > 3600#sh mpls l2transport vc 7232183 detail > Local interface: Vl183 up, line protocol up, Eth VLAN 183 up > Interworking type is Ethernet > Destination address: 172.20.40.7, VC ID: 7232183, VC status: down > Last error: Remote peer access circuit is down > Output interface: Vl925, imposed label stack {281} > Preferred path: not configured > Default path: active > Next hop: 172.20.202.49 > > Regards, > Christophe > > Le 2015-03-24 09:00, Mohammad Khalil a écrit : > > 3600#sh mpls l2transport vc 7232183 detail > > Local interface: Vl183 up, line protocol up, Eth VLAN 183 up > > Interworking type is Ethernet > > Destination address: 172.20.40.7, VC ID: 7232183, VC status: down > > Last error: Remote peer access circuit is down > > Output interface: Vl925, imposed label stack {281} > > Preferred path: not configured > > Default path: active > > Next hop: 172.20.202.49 > > Create time: 02:59:58, last status change time: 00:00:02 > > Last label FSM state change time: 00:01:38 > > Signaling protocol: LDP, peer 172.20.40.7:0 up > > Targeted Hello: 172.20.40.232(LDP Id) -> 172.20.40.7, LDP is UP > > Graceful restart: not configured and not enabled > > Non stop routing: not configured and not enabled > > Status TLV support (local/remote) : enabled/supported > > LDP route watch : enabled > > Label/status state machine : established, LruRrd > > Last local dataplane status rcvd: No fault > > Last BFD dataplane status rcvd: Not sent > > Last BFD peer monitor status rcvd: No fault > > Last local AC circuit status rcvd: No fault > > Last local AC circuit status sent: DOWN AC(rx/tx faults) > > Last local PW i/f circ status rcvd: No fault > > Last local LDP TLV status sent: No fault > > Last remote LDP TLV status rcvd: DOWN AC(rx/tx faults) > > Last remote LDP ADJ status rcvd: No fault > > MPLS VC labels: local 2042, remote 281 > > Group ID: local 0, remote 0 > > MTU: local 1500, remote 1500 > > Remote interface description: AMAAL_TEST > > Sequencing: receive disabled, send disabled > > Control Word: On (configured: autosense) > > Dataplane: > > SSM segment/switch IDs: 475811/242336 (used), PWID: 44 > > VC statistics: > > transit packet totals: receive 0, send 16 > > transit byte totals: receive 0, send 1200 > > transit packet drops: receive 0, seq error 0, send 0 > > > > 7613#sh mpls l2transport vc 7232183 detail > > Local interface: Vl183 up, line protocol up, Eth VLAN 183 up > > Interworking type is Ethernet > > Destination address: 172.20.40.232, VC ID: 7232183, VC status: up > > Output interface: none, imposed label stack {} > > Preferred path: not configured > > Default path: active > > No adjacency > > Create time: 03:12:56, last status change time: 00:00:03 > > Signaling protocol: LDP, peer 172.20.40.232:0 up > > Targeted Hello: 172.20.40.7(LDP Id) -> 172.20.40.232, LDP is UP > > Status TLV support (local/remote) : enabled/supported > > LDP route watch : enabled > > Label/status state machine : established, LrdRru > > Last local dataplane status rcvd: No fault > > Last local SSS circuit status rcvd: DOWN AC(rx/tx faults) > > Last local SSS circuit status sent: No fault > > Last local LDP TLV status sent: DOWN AC(rx/tx faults) > > Last remote LDP TLV status rcvd: No fault > > Last remote LDP ADJ status rcvd: No fault > > MPLS VC labels: local 281, remote 2042 > > Group ID: local 0, remote 0 > > MTU: local 1500, remote 1500 > > Remote interface description: AMAAL_TEST > > Sequencing: receive disabled, send disabled > > Control Word: On (configured: autosense) > > VC statistics: > > transit packet totals: receive 16, send 0 > > transit byte totals: receive 960, send 0 > > transit packet drops: receive 0, seq error 0, send 0 > > > > > >> To: [email protected] > >> From: [email protected] > >> Date: Tue, 24 Mar 2015 09:54:47 +0200 > >> Subject: Re: [c-nsp] AToM > >> > >> > >> > >> On 24/Mar/15 09:49, Mohammad Khalil wrote: > >> > Hi all > >> > I am trying to establish AToM between 7613 and 3600 > >> > The module from the 7613 side is 7600 ES+ 20xGE SFP > >> > > >> > 3600#sh run int vlan 183 > >> > interface Vlan183 > >> > no ip address > >> > xconnect 172.20.40.7 7232183 encapsulation mpls > >> > > >> > 7613#sh run int vlan 183 > >> > interface Vlan183 > >> > no ip address > >> > load-interval 30 > >> > xconnect 172.20.40.232 7232183 encapsulation mpls > >> > > >> > 7613#sh mpls l2transport vc 7232183 > >> > > >> > Local intf Local circuit Dest address VC ID > >> > Status > >> > ------------- -------------------------- --------------- ---------- > >> > ---------- > >> > Vl183 Eth VLAN 183 172.20.40.232 7232183 UP > >> > > >> > 3600#sh mpls l2transport vc 7232183 > >> > > >> > Local intf Local circuit Dest address VC ID > >> > Status > >> > ------------- -------------------------- --------------- ---------- > >> > ---------- > >> > Vl183 Eth VLAN 183 172.20.40.7 7232183 DOWN > >> > > >> > I have tried to configure L3VPN (VRF on both routers and test loopback > >> > interfaces) and it worked fine > >> > > >> > Any ideas? > >> > >> Detailed output? > >> > >> Mark. > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > -- > Christophe Lucas > http://www.clucas.fr/blog/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
