On 24/Mar/15 09:49, Mohammad Khalil wrote:
Hi all I am trying to establish AToM between 7613 and 3600 The module from the 7613 side is 7600 ES+ 20xGE SFP 3600#sh run int vlan 183 interface Vlan183 no ip address xconnect 172.20.40.7 7232183 encapsulation mpls 7613#sh run int vlan 183 interface Vlan183 no ip address load-interval 30 xconnect 172.20.40.232 7232183 encapsulation mpls 7613#sh mpls l2transport vc 7232183 Local intf Local circuit Dest address VC ID Status ------------- -------------------------- --------------- ---------- ---------- Vl183 Eth VLAN 183 172.20.40.232 7232183 UP 3600#sh mpls l2transport vc 7232183 Local intf Local circuit Dest address VC ID Status ------------- -------------------------- --------------- ---------- ---------- Vl183 Eth VLAN 183 172.20.40.7 7232183 DOWN I have tried to configure L3VPN (VRF on both routers and test loopback interfaces) and it worked fine Any ideas?
Detailed output? Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
