00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
06:01.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:01.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:01.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
06:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
[EMAIL PROTECTED]:~$
I didn't actually touch the xorg.conf, so no need to restart X.
It was already set to 1280x800. The screen is physically "filled" to its full extent, yet Screen Resolution says 1024x768, and it doesn't look the same as it does on that other operating system.
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
On 10/30/06, Gustin Johnson <
[EMAIL PROTECTED]> wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
This is for hard drive spin down and swap control (delaying swap writes
to save battery power on spun down disks). There is not really an
interactive program that run.
You have restarted X since you made the configuration changes right...?
What is the video card that you have in the laptop? lspci is your
friend here.
What driver is X using? Hint, look in the xorg.conf file. AFIK the
VESA driver does not support the resolutions that are not 4:3.
Mitchell Brown wrote:
> Update: Tom, laptop-mode-tools is already installed. How do I use it? I
> tried executing laptop-mode-tools, but its not there.
>
> On 10/30/06, *Tom Weniger* < [EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>> wrote:
>
> On 10/30/06, Mitchell Brown < [EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>> wrote:
> >
> > 1) 1024*768 - my laptop natively runs at 1280*800, yet, its not a
> choice in
> > the "Screen resolution" panel
> > 2) The battery meter is stuck at 100%. It can accurately tell when
> I'm
> > plugged in, when I'm not, and when the screen opens and closes.
> Suspend
> > works, as does hibernation. Yet, when unplugged for over 45
> minutes, the
> > battery meter remained at 100% - obviously false.
> >
> > If anyone has any clues on how to repair these malfunctions, I'd
> be obliged.
> > mb
> >
> >
> Greetings Mitchell,
>
> 1) You can try to manually adjust the display resolution in the
> xorg.conf file by adding the resolution to the section "Screen" and
> verifying your display settings.
>
> 2) You can install the "laptop-mode tools" and follow the instructions
> to adjust the power management of your laptop as well as hard disk
> tuning among other things.
>
> HtH...
> --
> Virtually,
> Tom W
>
> _______________________________________________
> clug-talk mailing list
> [email protected] <mailto:[email protected]>
> http://clug.ca/mailman/listinfo/clug-talk_clug.ca
> Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
> **Please remove these lines when replying
>
>
>
>
> --
> pub 1024D/9091C422 02/05/2006 Mitchell Brown <[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>>
> Primary key fingerprint: 812B 94BC EA0D 345A CC1C 2ED9 F7F6 5CCF
> 9091 C422
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> clug-talk mailing list
> [email protected]
> http://clug.ca/mailman/listinfo/clug-talk_clug.ca
> Mailing List Guidelines (http://clug.ca/ml_guidelines.php )
> **Please remove these lines when replying
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFRq+3wRXgH3rKGfMRAmdjAJ9iyKJBu0euiHPim6Sm8gMdNzRDOgCglpTI
2QVGOmm64LEvG6FUZTkSet0=
=EYgr
-----END PGP SIGNATURE-----
_______________________________________________
clug-talk mailing list
[email protected]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca
Mailing List Guidelines ( http://clug.ca/ml_guidelines.php)
**Please remove these lines when replying
--
pub 1024D/9091C422 02/05/2006 Mitchell Brown <[EMAIL PROTECTED] >
Primary key fingerprint: 812B 94BC EA0D 345A CC1C 2ED9 F7F6 5CCF 9091 C422
_______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
