A 3/4 inch plastic barbed hose adaptor is screwed into the brass thru hull gate valve for the water inlet to the head. I want to replace the hose barb with another one, but can't unscrew it from the thru hull valve. Teflon tape shows on the plastic threads of the barb so I expected it would be an easy job to unscrew it, but so far I can't move it. Tried a heat gun on low heat but didn't help. Any ideas what to try? - obviously I don't want to break the plastic fitting and end up with the threaded portion stuck in the gate valve.
Eric Cat's Paw, 35-2 Mattapoisett, MA _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
