I second what Rich said; On my boat we were looking for a place to mount new speakers and couldn't find a suitable area for one reason or another, so we just put then in the inspection port openings with extra long wires so that if we needed to get back in we could just take them out and do whatever work is needed without damaging the speakers or wiring; the speakers are not located symmetrically, but that has not been an issue... best of luck.
Richard 1987 33-II Richard N. Bush Law Offices 235 South Fifth Street, Fourth Floor Louisville, Kentucky 40202 502-584-7255 -----Original Message----- From: Rich C&C <[email protected]> To: cnc-list <[email protected]> Sent: Mon, Dec 17, 2012 8:59 am Subject: Re: Stus-List 30-1 cockpit transom access plates diameter? Nate: I’d highly recommend settling for a gift certificate and waiting until you can do the measurement on site when the snow is gone, or get someone local to measure and take pictures. There is no guarantee that any other 30-1 is identical to yours. Rich Knowles INDIGO - LF38 Halifax, NS From: CnC-List [mailto:[email protected]] On Behalf Of Nate Flesness Sent: December 16, 2012 18:40 To: [email protected] Subject: Re: Stus-List 30-1 cockpit transom access plates diameter? Santa is going to upgrade my ancient (cassette player) sound system from the PO. One issue in picking a new system is cockpit speakers - would be nice if they fit the existing holes (and yup, should be magnetic shielded too - I actually use my compass sometimes). Anyone happen to know the size of the two access plates beneath the engine compartment vents on the transom of the 30-1? The choices seem to be 6", 8" or `10". I'm guessing 8"... but the boat is 4 hours away in the snow... Nate "Sarah Jean" 1980 30-1 on the very hard Siskiwit Bay Marina Cornucopia, WI Lake Superior _______________________________________________ his List is provided by the C&C Photo Album ttp://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
