I think that's the ticket, Bill; use the stuff from new to prevent problems.
Andy C&C 40 Peregrine On Wed, Aug 5, 2015 at 3:05 PM, Bill Coleman via CnC-List < cnc-list@cnc-list.com> wrote: > With my old tank, before I started using Biobor my diesel was always dark > and dirty looking. > > Starting out with a new tank in 2005, and using this, it is always clean > and red, and no clogged filters. > > I am a fan. > > > > Regards, > > > > Bill Coleman > > C&C 39 Erie, Pa > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *robert > via CnC-List > *Sent:* Wednesday, August 05, 2015 10:10 AM > *To:* cnc-list@cnc-list.com > *Cc:* robert > *Subject:* Stus-List filters > > > > I have changed my Racor and Yanmar filters twice in 10 sailing seasons and > have never cleaned my fuel tank. When the old filters were removed, they > looked perfectly fine. > > Last Wednesday evening, a fellow club mate with a Tartan 34 and I were > motoring side by side back to our moorings when his engine suddenly > stopped. I towed him to his mooring. The next day, he changed his fuel > filters and all was well again. He had his fuel tank cleaned about 6 years > ago and he changes his filters every year before launch which he did again > this Spring. > > Should have been my engine that suddenly stopped and not his......go > figure! > > Rob Abbott > AZURA > C&C32- 84 > Halifax, N.S. > > > > ------ Original message------ > > *From: *Bev Parslow via CnC-List > > *Date: *Tue, Aug 4, 2015 12:05 > > *To: *cnc-list@cnc-list.com; > > *Cc: *Bev Parslow; > > *Subject:*Stus-List filters > > > > Last year after we changed both fuel filters and then cleaned out the tank > on the 29-2. On the weekend it appears that the filters need to be changed > again. Is this normal? We have been putting in the usual additives. What is > working with your fuel systems? > > > > > _______________________________________________ > > > > Email address: > > CnC-List@cnc-list.com > > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com