Used a local NJ hydraulic shop twice in 21 years owning my boat. I typically leave 500# pressure at the slip and keep a SS washer on the rod above the cylinder to protect that O-ring seal from UVs. The pressure holds for months. Fluid: The hydraulic shop advised me to change the original fluid that looked like transmission fluid or power steering fluid to 10 weight non-detergent fluid. Easily found at auto stores like NAPA. Chuck Scheaffer, Resolute 1989 C&C 34R Annapolis
> On 11/17/2023 8:44 PM EST Paul Fountain via CnC-List <cnc-list@cnc-list.com> > wrote: > > > I always bring mine home, think the extreme cold and dry weather when > combined with the lack of use are bad for the seals. > > Get Outlook for iOS https://aka.ms/o0ukef > > --------------------------------------------- > From: paul.hood via CnC-List <cnc-list@cnc-list.com> > Sent: Friday, November 17, 2023 6:48:48 PM > To: David Risch via CnC-List <cnc-list@cnc-list.com> > Cc: paul.hood <paul.h...@rogers.com> > Subject: Stus-List Re: Recommendations to rebuild hydraulic cylinders for > backstay > > Went to a specialty hydralics shop to get mine fixed. They couldn't don't. > Went elsewhere and they did fine. Still wasn't cheap. Done work on the 2 > hydralics and the pump. > > Seems I do have periodic failures in the backstay and pump (seals) too often > and usually experienced after the winter. Not sure if the winters up here > play havoc with the seals but I've taken them off now in the fall. They're > now stored indoors for the winter. Hoping to avoid the expensive and time > consuming spring fixes. > > > Paul Hood > 416.799.5549 > > > -------- Original message -------- > From: David Risch via CnC-List <cnc-list@cnc-list.com> > Date: 2023-11-17 6:27 p.m. (GMT-05:00) > To: Stus-List <cnc-list@cnc-list.com> > Cc: David Risch <davidrisc...@msn.com> > Subject: Stus-List Re: Recommendations to rebuild hydraulic cylinders for > backstay > > > Just go to a local hydraulic shop. Sorry as a Navtech “technician” ripped me > off for two “re-builds” in two years at $500 an incompetent rebuild. > Construction guys don’t tolerate that crap. $100 once and done. It is > just a pump. > > > > From: Matthew L. Wolford via CnC-List <cnc-list@cnc-list.com> > Sent: Friday, November 17, 2023 2:12 PM > To: Stus-List <cnc-list@cnc-list.com> > Cc: Matthew L. Wolford <wolf...@erie.net> > Subject: Stus-List Re: Recommendations to rebuild hydraulic cylinders for > backstay > > > > I also like Lew, whom I contacted based on recommendations from this list. > That said, he’s not from NJ (far from it), and shipping cost almost as much > as the work. Also, the rebuild work I had done was prophylactic, and my unit > now has a very minor leak that it didn’t have before. I’m sure he’d fix it > if I sent it back. Bottom line: as much as I like Lew, I suggest finding > someone local. > > Sent from my iPhone > > > > > > > On Nov 17, 2023, at 1:37 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com > > mailto:cnc-list@cnc-list.com> wrote: > > > > > > > > > > > Second Lew Townsend. He rebuilt mine after another Navtec rebuilder > > botched it. Excellent to work with. > > > > > > > > -- > > > > Dennis C. > > > > Touche' 35-1 #83 > > > > Mandeville, LA > > > > > > > > On Fri, Nov 17, 2023 at 8:55 AM ALAN BERGEN via CnC-List > > <cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com> wrote: > > > > > > > > Lew Townsend did all my Navtec hydraulic repairs. Don't know whether he > > > does Sailtec, but you can call him at (206) 498-7282. He does quality > > > work. Others on the list have also used him. > > > > > > > > > > > > Alan Bergen > > > > > > 35 Mk III Thirsty > > > > > > Rose City YC > > > > > > Portland, OR > > > > > > > > > > > > > > > > > > > > > > > > On Fri, Nov 17, 2023 at 6:36 AM Allen Miles via CnC-List > > > <cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com> wrote: > > > > > > > > > > > Good morning All, > > > > > > > > > > > > > > > > Septima has moved from Hampton Roads, VA to Bayville, NJ. Upon arrival > > > > we noticed that the hydraulic cylinders for the backstay were leaking. > > > > Does anyone have recommendations on a reputable service to rebuild them > > > > in the NJ area? > > > > > > > > > > > > > > > > They are Sailtec branded. However, the marina we are in refuses to do > > > > business with them based on previous bad experiences. Love to support > > > > local businesses but also want a quality job. Any suggestions > > > > appreciated. > > > > > > > > > > > > > > > > Thanks and have a great weekend, > > > > > > > > > > > > > > > > Allen Miles > > > > > > > > 30 Mk II, Septima > > > > > > > > Bayville, NJ > > > > > > > > Please show your appreciation for this list and the Photo Album site > > > > and help me pay the associated bills. Make a contribution at: > > > > https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!qs2Qvcff0x2r9Xu484Io53CdPY1cNhT0tOLx9hjHxOpx03avqPpvzczr7rQ5cI-zSB2xudbFXoqRejPEBjRfjcI$ > > > > Thanks for your help. > > > > Stu > > > > > > > > > > Please show your appreciation for this list and the Photo Album site and > > > help me pay the associated bills. Make a contribution at: > > > https://www.paypal.me/stumurray > > > Thanks for your help. > > > Stu > > > > > > > > > > > Please show your appreciation for this list and the Photo Album site and > > help me pay the associated bills. Make a contribution at: > > https://www.paypal.me/stumurray > > Thanks for your help. > > Stu > > > Please show your appreciation for this list and the Photo Album site and help > me pay the associated bills. Make a contribution at: > https://www.paypal.me/stumurray > Thanks for your help. > Stu >
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu
