If you plan on pulling up track take the genoa car off the track first. There is a gadget you can get from rigger for loading/retaining the balls. Put car back on after the re-bedding work is done
Mike Persistence Halifax www.hoytsailing.com From: Ron Casciato via CnC-List <[email protected]> Sent: Wednesday, May 6, 2026 1:20 PM To: Stus-List <[email protected]> Cc: Ron Casciato <[email protected]> Subject: Stus-List Re: Genoa Track rebed That sounds scary. Losing balls on deck will be too risky. Can you assemble the cars onto the track on your workbench and then transport the whole system to the deck. I've chased loose balls on deck, it always ended badly!! Ron C. Impromptu That sounds scary. Losing balls on deck will be too risky. Can you assemble the cars onto the track on your workbench and then transport the whole system to the deck. I've chased loose balls on deck, it always ended badly!! Ron C. Impromptu C&C 38MKIIC On May 6, 2026 12:10 PM, CHARLES SCHEAFFER via CnC-List <[email protected]> wrote: Great source for bedding is: https://marinehowto.com/bed-it-tape/<https://urldefense.com/v3/__https:/marinehowto.com/bed-it-tape/__;!!CmXilJi6!ZJY-RpvJbeCtHajUiR2WX-p4WJa6undmtzyjsvUqYnXS1-2Z1y9t7IJHXEJb_OB4B7YM3RGfrcZKkI-HFFNUdQ$> It will be challenging to apply Bed-It to the 27 bolts and get the car to slide past the screw heads so I can push down all the bolts into all the holes. Guess I'll press in a few bolts on the end of the track, to make room for the car, turn the track upside down, load all the balls into the car, and slide the car down the track, past the end so the balls stay in. C On 05/06/2026 11:29 AM EDT Bob Mann via CnC-List <[email protected]> wrote: And wherever possible, tighten the nut, NOT the bolt. On 05/06/2026 11:17 AM EDT David Knecht via CnC-List <[email protected]> wrote: I roll out a small worm of butyl, wrap it under the head of the bolt and then it gets squeezed when the bolt is tightened. That makes it both waterproof and resistant to galvanic action. I picked that idea up from reading somewhere, but don't remember where. Dave David Knecht S/V Aries 1990 C&C 34+ New London, CT [cid:4073BE72-4704-4EA7-8EBA-B73B833F502B] On May 6, 2026, at 10:19 AM, Brian Davis via CnC-List <[email protected]> wrote: I think you are "right on track" so to speak with using the Tef-Gel under the bolt heads since it's stainless to aluminum. On Wed, May 6, 2026 at 10:16 AM CHARLES SCHEAFFER via CnC-List <[email protected]<mailto:[email protected]>> wrote: I'm rebedding the genoa tracks and thinking of using Butyl tape around the bolts between aluminum track and deck, but should I use bedding or Tef-Gel under the bolt heads where they sit in the track? My tracks are standard Harken aluminum with a hollow section down the middle. Thanks, Chuck S Please help cover the costs of maintaining this list by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray<https://urldefense.com/v3/__https:/www.paypal.com/paypalme/stumurray__;!!CmXilJi6!ZJY-RpvJbeCtHajUiR2WX-p4WJa6undmtzyjsvUqYnXS1-2Z1y9t7IJHXEJb_OB4B7YM3RGfrcZKkI8QY0_x6A$> All contributions are greatly appreciated. -- [https://ci3.googleusercontent.com/mail-sig/AIorK4xVc1wXP85xpqAI__H5pkQVknKfAJ3KfKn-JkWbzM1m2JeTmxVHPmlzpAUp8f5cE6oSYdpDblHmS4zn] Please help cover the costs of maintaining this list by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray<https://urldefense.com/v3/__https:/www.paypal.com/paypalme/stumurray__;!!CmXilJi6!ZJY-RpvJbeCtHajUiR2WX-p4WJa6undmtzyjsvUqYnXS1-2Z1y9t7IJHXEJb_OB4B7YM3RGfrcZKkI8QY0_x6A$> All contributions are greatly appreciated. Please help cover the costs of maintaining this list by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray<https://urldefense.com/v3/__https:/www.paypal.com/paypalme/stumurray__;!!CmXilJi6!ZJY-RpvJbeCtHajUiR2WX-p4WJa6undmtzyjsvUqYnXS1-2Z1y9t7IJHXEJb_OB4B7YM3RGfrcZKkI8QY0_x6A$> All contributions are greatly appreciated. Please help cover the costs of maintaining this list by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray<https://urldefense.com/v3/__https:/www.paypal.com/paypalme/stumurray__;!!CmXilJi6!ZJY-RpvJbeCtHajUiR2WX-p4WJa6undmtzyjsvUqYnXS1-2Z1y9t7IJHXEJb_OB4B7YM3RGfrcZKkI8QY0_x6A$> All contributions are greatly appreciated.
Please help cover the costs of maintaining this list by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
