SE/30 questions (monitor and screws)

[Steve Fuller]

I have pulled my SE/30 out of the bag this week to get the IIfx ROM 
SIMM installed and working. I ended up installing 7.1 as this was the 
last 7.X version that I could do the ROM swap on w/o hacking  any files 
to get it to work. I had some questions that came up because of this 
work.

A) I need to know the size, thread pitch, and a source for the case 
screws for this machine. I have one screw holding the case to the 
frame. I'd like the rest of them installed based on principle.

B) The monitor has a tendency to wiggle some every once in a while not 
a huge amount, but enough that I notice it on such a small screen. My 
assumption is that this is maybe an issue with one of the boards that 
drives the display (analog board?). Maybe a cold solder joint or 
something?

C) Anyone have a Micron XCeed 30 or other Grayscale card that they want 
to let go cheap? ;-)

Thanks

Steve Fuller

--
Compact Macs is sponsored by <http://lowendmac.com/>.
     Support Low End Mac <http://lowendmac.com/lists/support.html>

Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------