-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Brook Humphrey wrote:
> Sorry  I have sent this to the list twice now with
[EMAIL PROTECTED] and
> his simply disappeared while my other emails have gone to the list. So  I
> have cc'd it to Buchan also and since then i have added notes to the
bottom.

They made it to use, maybe the replies did not make it to you, so you're
cc'ed for this one.

>
> In the current samba packages if you try to enable wins resolution the
nmbd
> portion of the server crashes or I should say it does not start and fails
> during the start.
>

I have seen issues with nmbd exiting, but have not had time to
investigate it, but we have 2.2.7a-4mdk running on 9.0 as our domain
controller and wins server with no problems at all. My cooker box runs
with 'wins server = <ip>' and name resolve order = 'wins lmhosts bcast'
and samba restarts fine etc (I am not prepared to restart samba on our
domain controller to just to test this ...).

You're going to have to do more debugging, but I don't see that this is
going to have us patch anything now ... if it really is a problem,
hopefully it will be fixed in 2.2.8 and we might have to do an update
(since we need to update the 2.2.7 for 9.0, and I don't think 9.0 should
be ahead of 9.1 ;-)).

>
> Also has anybody had the problem were the computers are seen fine but
you can
> not browse the workgroup? I'm only getting this from xp boxes. If I go
> start->run->//server it will pull up the server fine from this I can add
> printers to the clients and when you click on my network places the
shares
> come up just fine but you can not view workgroup computers. As far as
 I can
> tell this is only happening from windows xp both pro and home.

We only have 3 XP boxen, and since they are the management's laptops, we
hardly see them ... but they can browse the network no problems. Have
you enabled the firewall perchance? It defaults to firewalling off some
NBT (netbios over TCP) ports.

>
> I have already checked the ifc and browser services and browser is on
and ifc
> is off like they are supposed to be. I have also tried setting up
linux ax
> the wins master which is how  I found out it crashes when you try to
enable
> it. I have set it to local master, domain master, and preferred master.
>
> Ok so I have done everything possible here that I know of. Is it
possible that
> the problem is with samba itself?
>

Check the samba list ... there are some issues with 2.2.7a, but mainly
the 4 patches we have since 2.2.7a-3mdk address most things that will be
fixed in 2.2.8.

>
> Note: I was able to get it working again last night. For my setup I set
> security back to share and now everything works again. For some reason
with
> security set to user nobody using windows xp can brows the network but
with
> it set to share then browsing the network works just fine.

This looks like a configuration issue or an authentication problem,
which would lead me to believe
a)Either you have no smbpasswd for the user logged in on the server
which is master browser and you have not got something like "map to
guest = bad user" (now a default).
b)You have not applied the signorseal patch to your XP boxen. Get it by:

$ rpm -ql samba-doc|grep reg
or at http://ranger.dnsalias.com/mandrake/muo/connect/csamba6.html#winxp

> Also to state
> again there were no other problems the network worked in that you could
> access the machines and print to the printer you could just not brows the
> workgroup computers.
>

That probably rules out the firewall ... if you could see the print job
status.

> Still the issue with winbind not starting should be looked into.
>

WINS or WINBIND????

Buchan

P.S. I have uploaded sword, gnomesword and bibletime to contrib ... I
made some fixes, mail me if you want to try and get them work
multi-distro without hardcoding stuff (like %ostype) in the spec file.
Feedback on those packages would also be good.

- --
|--------------Another happy Mandrake Club member--------------|
Buchan Milne                Mechanical Engineer, Network Manager
Cellphone * Work            +27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive Engineering         http://www.cae.co.za
GPG Key                   http://ranger.dnsalias.com/bgmilne.asc
1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQE+cgPvrJK6UGDSBKcRAqaTAJ48BGyOVNkHSuufB1MbdJ2aEGZI8ACgxtYC
Txa16V8KYcBHBdDsymcwCQg=
=47+O
-----END PGP SIGNATURE-----


Reply via email to