Hi, I tried to enable VGA console and disable serial console (BMC) but it does not boot too.
I will check if burning 6.0 to CD works. Fabio -----Messaggio originale----- Da: Émeric Maschino [mailto:[email protected]] Inviato: martedì 25 settembre 2012 9.41 A: Bettoni Fabio Cc: [email protected] Oggetto: Re: Apt-get dist-upgrade squeeze->wheezy Mmmh, the syntax seems correct. As an alternative, rather than entering the console parameters at the boot prompt, you could also try to add it to the elilo.conf file: image=... initrd=... root= append="console=ttyS0,9600n8" I don't know for rx4640, but I also had to set input/output/error console to PcAnsi (IIRC) terminal in EFI with zx6000. Emeric 2012/9/24 Bettoni Fabio <[email protected]>: > Set to BMC COM port, to access via telnet > > I was suspecting I had to use VGA console, I will do tomorrow, > > But I also tried to add one of the following to Boot: prompt > console=ttyS0,9800n8 > console=ttyS1,9800n8 > console=ttyS2,9800n8 > > and they didn't work > > > -----Messaggio originale----- > Da: Émeric Maschino [mailto:[email protected]] > Inviato: lunedì 24 settembre 2012 20:41 > A: Bettoni Fabio > Cc: [email protected] > Oggetto: Re: Apt-get dist-upgrade squeeze->wheezy > > Hi, > > Is the console output set to VGA console or COM port? > > Emeric > > > 2012/9/24 Bettoni Fabio <[email protected]>: >> Sorry, the update was from squeeze to wheezy >> >> -----Messaggio originale----- >> Da: Bettoni Fabio [mailto:[email protected]] >> Inviato: lunedì 24 settembre 2012 11.22 >> A: '[email protected]' >> Oggetto: R: Apt-get dist-upgrade squeeze->wheezy >> >> Hi, >> >> I did the whole dist-upgrade on rx4640 from squeeze to sid, and it >> ended with unbootable system (I think it did not copy new vmlinuz and >> initrd to EFI partition) >> >> >> I written to CD: >> http://cdimage.debian.org/cdimage/weekly-builds/ia64/iso-cd/debian-te >> sting-ia64-CD-1.iso >> but when I try to start I get: >> >> | This is the Debian GNU/Linux installation system, built on >> 20120828. | >> | >> | >> | Use the arrow keys to select a menu item and then Enter to select it. >> | >> | Use the function keys for help. On a serial console, use Ctrl-F and the >> | >> | function key number instead. >> | >> | >> | >> | Beware that this is an OS installer, and misuse can result in the loss of >> | >> | any data currently on your disks. >> | >> | /----------------------------------------------------------------------\ >> | >> | | Install >> |^ | >> | | Install [Expert mode] | >> | >> | | Rescue | >> | >> | | | >> | >> | | | >> | >> | | >> |v | >> | \----------------------------------------------------------------------/ >> | >> | >> | >> | Boot: >> | >> | >> | >> | Help: [F1-General] [F2-Params] >> | >> >> If I choos Install [Expert mode] pr Rescue I get the following: >> >> Uncompressing Linux... done >> Loading file \initrd.gz...done >> *********************************************************** >> * ROM Version : 04.28 >> * ROM Date : 06/06/2007 >> * BMC Version : 04.06 >> *********************************************************** >> 0 0 0x0015B2 0x0000000019211505 boot time event >> 1 0 0x0000A4 0x0000000000000000 start memory configuration 0 0 >> 0x0015B2 0x0000000024971388 boot time event >> 1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation >> >> What can I do ? Is system unsupported or I have to give some magic >> parameters ? >> >> Fabio >> >> >> Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle >> persone indicate. La diffusione, copia o qualsiasi altra azione derivante >> dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora >> abbiate ricevuto questo documento per errore siete cortesemente pregati di >> darne immediata comunicazione al mittente e di provvedere alla sua >> distruzione, Grazie. >> >> This e-mail and any attachments is confidential and may contain privileged >> information intended for the addressee(s) only. Dissemination, copying, >> printing or use by anybody else is unauthorised. If you are not the intended >> recipient, please delete this message and any attachments and advise the >> sender by return e-mail, Thanks. >> >> >> -- >> To UNSUBSCRIBE, email to [email protected] >> with a subject of "unsubscribe". Trouble? Contact >> [email protected] >> Archive: >> http://lists.debian.org/5DA6D16A39710843ACA344B75F2C76891AAEB60C23@GR >> FMBX702RM001.griffon.local >> >> >> -- >> To UNSUBSCRIBE, email to [email protected] >> with a subject of "unsubscribe". Trouble? Contact >> [email protected] >> Archive: >> http://lists.debian.org/5DA6D16A39710843ACA344B75F2C76891AAEB60C54@GRFMBX702RM001.griffon.local >> -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/5DA6D16A39710843ACA344B75F2C76891AAEB617AB@GRFMBX702RM001.griffon.local
