Sorry, I mean Wheezy kernel in my previous post.
Emeric
2012/10/6 Émeric Maschino <[email protected]>:
> Well,
>
> I don't understand what's going wrong with your system.
> I can confirm that both 3.3.8-gentoo and current Squeeze kernels are
> booting fine on my zx6000.
>
> Did you try to rebuild Squeeze kernel using 3.3.8-gentoo .config file?
>
> Emeric
>
>
> 2012/10/4 Bettoni Fabio <[email protected]>:
>>
>> Hi,
>>
>> I tried to boot gentoo install-ia64-minimal-20121002.iso
>>
>> It uses 3.3.8-gentoo and it boots almost correctly (didn't get login prompt
>> and waiting a lot on acpi staff)
>>
>> So I think there's something different between configs.
>>
>> Do you have an idea ? Can you help me ?
>>
>> Fabio
>>
>>
>> Loading.: Internal Bootable DVD
>> Starting: Internal Bootable DVD
>>
>> Welcome to the Gentoo/IA64 LiveCD!
>>
>> To boot the CD with default options type 'gentoo' or hit the Enter key.
>> To boot, forcing a serial console on ttyS0 at 9600bps type 'gentoo-serial'.
>> To boot, if you're using iLO remote console, type 'gentoo-ilo', which
>> forces a serial console on ttyS3 at 9600bps.
>> To boot, if you're using an SGI system, type 'gentoo-sgi', which
>> forces a serial console on ttySG0 at 115200bps.
>>
>> You may add extra arguments to either to modify the boot options.
>>
>> Please report any issues to <[email protected]>!
>>
>> For further information on Gentoo/IA64 installation please see the
>> IA64 installation handbook.
>>
>> ELILO boot: Uncompressing Linux... done
>> Loading file \efi\boot\gentoo.igz...done
>> Linux version 3.3.8-gentoo (root@dolphin) (gcc version 4.5.3 (Gentoo
>> 4.5.3-r2 p1.6, pie-0.4.7) ) #1 SMP Wed Oct 3 04:40:00 UTC 2012
>> EFI v1.10 by HP: SALsystab=0x3e528000 ACPI 2.0=0x3fe22000 SMBIOS=0x3e52a000
>> HCDP=0x3fe20000
>> booting generic kernel on platform hpzx1
>> PCDP: v3 at 0x3fe20000
>> Early serial console at MMIO 0x84053000 (options '9600n8')
>> bootconsole [uart8250] enabled
>> ACPI: RSDP 000000003fe22000 00028 (v02 HP)
>> ACPI: XSDT 000000003fe2202c 00094 (v01 HP rx4640 00000000 HP
>> 00000000)
>> ACPI: FACP 000000003fe36cd8 000F4 (v03 HP rx4640 00000000 HP
>> 00000000)
>> ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16
>> (20120111/tbfadt-548)
>> ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16
>> (20120111/tbfadt-548)
>> ACPI: DSDT 000000003fe221c8 0D0F5 (v01 HP rx4640 00000007 INTL
>> 20050309)
>> ACPI: FACS 000000003fe36dd0 00040
>> ACPI: SPCR 000000003fe36e10 00050 (v01 HP rx4640 00000000 HP
>> 00000000)
>> ACPI: DBGP 000000003fe36e60 00034 (v01 HP rx4640 00000000 HP
>> 00000000)
>> ACPI: APIC 000000003fe37080 000B0 (v01 HP rx4640 00000000 HP
>> 00000000)
>> ACPI: SPMI 000000003fe36e98 00050 (v04 HP rx4640 00000000 HP
>> 00000000)
>> ACPI: CPEP 000000003fe36f50 00034 (v01 HP rx4640 00000000 HP
>> 00000000)
>> ACPI: SSDT 000000003fe2f2c8 001A7 (v01 HP rx4640 00000006 INTL
>> 20050309)
>> ACPI: SSDT 000000003fe2f478 00F65 (v01 HP rx4640 00000006 INTL
>> 20050309)
>> ACPI: SSDT 000000003fe303e8 011CD (v01 HP rx4640 00000006 INTL
>> 20050309)
>> ACPI: SSDT 000000003fe315b8 021B5 (v01 HP rx4640 00000006 INTL
>> 20050309)
>> ACPI: SSDT 000000003fe33778 021B5 (v01 HP rx4640 00000006 INTL
>> 20050309)
>> ACPI: SSDT 000000003fe35938 011CD (v01 HP rx4640 00000006 INTL
>> 20050309)
>> ACPI: SSDT 000000003fe36b08 000DC (v01 HP rx4640 00000006 INTL
>> 20050309)
>> ACPI: SSDT 000000003fe36be8 000E0 (v01 HP rx4640 00000006 INTL
>> 20050309)
>> ACPI: Local APIC address c0000000fee00000
>> 2 CPUs available, 2 CPUs total
>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>> Initial ramdisk at: 0xe0000040fe8c1000 (7111052 bytes)
>> SAL 3.1: HP version 4.28
>> SAL Platform features: None
>> SAL: AP wakeup using external interrupt vector 0xff
>> MCA related initialization done
>> Virtual mem_map starts at 0xa0007fffc7200000
>> Zone PFN ranges:
>> DMA 0x00000400 -> 0x00040000
>> Normal 0x00040000 -> 0x01040000
>> Movable zone start PFN for each node
>> Early memory PFN ranges
>> 0: 0x00000400 -> 0x0000f7c9
>> 0: 0x0000f88f -> 0x0000f94a
>> 0: 0x0000ff00 -> 0x0000ff88
>> 0: 0x01010000 -> 0x0103fbff
>> 0: 0x0103fc00 -> 0x0103fef6
>> 0: 0x0103ff1f -> 0x0103ff80
>> 0: 0x0103ffa0 -> 0x0103fff8
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 201021
>> Policy zone: Normal
>> Kernel command line: BOOT_IMAGE=atapi0:/efi/boot/gentoo initrd=gentoo.igz
>> root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs
>> cdroot
>> PID hash table entries: 4096 (order: 1, 32768 bytes)
>> Memory: 4095648k/4119584k available (13370k code, 52480k reserved, 6165k
>> data, 1152k init)
>> Hierarchical RCU implementation.
>> NR_IRQS:1024
>> ACPI: Local APIC address c0000000fee00000
>> GSI 20 (level, low) -> CPU 0 (0x0000) vector 49
>> Console: colour VGA+ 80x25
>> Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032)
>> pid_max: default: 32768 minimum: 301
>> Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
>> Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
>> Mount-cache hash table entries: 1024
>> ACPI: Core revision 20120111
>> Boot processor id 0x0/0x0
>> Fixed BSP b0 value from CPU 1
>> CPU 1: synchronized ITC with CPU 0 (last diff -32 cycles, maxerr 718 cycles)
>> Brought up 2 CPUs
>> Total of 2 processors activated (4780.03 BogoMIPS).
>> DMI 2.3 present.
>> NET: Registered protocol family 16
>> ACPI: bus type pci registered
>> bio: create slab <bio-0> at 0
>> ACPI: Added _OSI(Module Device)
>> ACPI: Added _OSI(Processor Device)
>> ACPI: Added _OSI(3.0 _SCP Extensions)
>> ACPI: Added _OSI(Processor Aggregator Device)
>> ACPI: Interpreter enabled
>> ACPI: (supports S0 S5)
>> ACPI: Using IOSAPIC for interrupt routing
>> ACPI: No dock devices found.
>> ACPI: PCI Root Bridge [L000] (domain 0000 [bus 00-1f])
>> pci_root HWP0002:00: host bridge window [io 0x0000-0x1fff]
>> pci_root HWP0002:00: host bridge window [mem 0x000a0000-0x000fffff]
>> pci_root HWP0002:00: host bridge window [mem 0x80000000-0x8fffffff]
>> pci_root HWP0002:00: host bridge window [mem 0x80004000000-0x80103fffffe]
>> PCI host bridge to bus 0000:00
>> pci_bus 0000:00: root bus resource [io 0x0000-0x1fff]
>> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff]
>> pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff]
>> pci_bus 0000:00: root bus resource [mem 0x80004000000-0x80103fffffe]
>> pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
>> ACPI: PCI Root Bridge [L001] (domain 0000 [bus 20-3f])
>> pci_root HWP0002:01: host bridge window [io 0x2000-0x3fff]
>> pci_root HWP0002:01: host bridge window [mem 0x90000000-0x9fffffff]
>> pci_root HWP0002:01: host bridge window [mem 0x90004000000-0x90103fffffe]
>> PCI host bridge to bus 0000:20
>> pci_bus 0000:20: root bus resource [io 0x2000-0x3fff]
>> pci_bus 0000:20: root bus resource [mem 0x90000000-0x9fffffff]
>> pci_bus 0000:20: root bus resource [mem 0x90004000000-0x90103fffffe]
>> pci0000:20: Unable to request _OSC control (_OSC support mask: 0x19)
>> ACPI: PCI Root Bridge [L002] (domain 0000 [bus 40-7f])
>> pci_root HWP0002:02: host bridge window [io 0x4000-0x7fff]
>> pci_root HWP0002:02: host bridge window [mem 0xa0000000-0xbfffffff]
>> pci_root HWP0002:02: host bridge window [mem 0xa0004000000-0xa0103fffffe]
>> PCI host bridge to bus 0000:40
>> pci_bus 0000:40: root bus resource [io 0x4000-0x7fff]
>> pci_bus 0000:40: root bus resource [mem 0xa0000000-0xbfffffff]
>> pci_bus 0000:40: root bus resource [mem 0xa0004000000-0xa0103fffffe]
>> pci0000:40: Unable to request _OSC control (_OSC support mask: 0x19)
>> ACPI: PCI Root Bridge [L004] (domain 0000 [bus 80-9f])
>> pci_root HWP0002:03: host bridge window [io 0x8000-0x9fff]
>> pci_root HWP0002:03: host bridge window [mem 0xc0000000-0xcfffffff]
>> pci_root HWP0002:03: host bridge window [mem 0xc0004000000-0xc0103fffffe]
>> PCI host bridge to bus 0000:80
>> pci_bus 0000:80: root bus resource [io 0x8000-0x9fff]
>> pci_bus 0000:80: root bus resource [mem 0xc0000000-0xcfffffff]
>> pci_bus 0000:80: root bus resource [mem 0xc0004000000-0xc0103fffffe]
>> pci0000:80: Unable to request _OSC control (_OSC support mask: 0x19)
>> ACPI: PCI Root Bridge [L005] (domain 0000 [bus a0-bf])
>> pci_root HWP0002:04: host bridge window [io 0xa000-0xbfff]
>> pci_root HWP0002:04: host bridge window [mem 0xd0000000-0xdfffffff]
>> pci_root HWP0002:04: host bridge window [mem 0xd0004000000-0xd0103fffffe]
>> PCI host bridge to bus 0000:a0
>> pci_bus 0000:a0: root bus resource [io 0xa000-0xbfff]
>> pci_bus 0000:a0: root bus resource [mem 0xd0000000-0xdfffffff]
>> pci_bus 0000:a0: root bus resource [mem 0xd0004000000-0xd0103fffffe]
>> pci0000:a0: Unable to request _OSC control (_OSC support mask: 0x19)
>> ACPI: PCI Root Bridge [L006] (domain 0000 [bus c0-ff])
>> pci_root HWP0002:05: host bridge window [io 0xc000-0xffff]
>> pci_root HWP0002:05: host bridge window [mem 0xe0000000-0xfdffffff]
>> pci_root HWP0002:05: host bridge window [mem 0xe0004000000-0xe0103fffffe]
>> PCI host bridge to bus 0000:c0
>> pci_bus 0000:c0: root bus resource [io 0xc000-0xffff]
>> pci_bus 0000:c0: root bus resource [mem 0xe0000000-0xfdffffff]
>> pci_bus 0000:c0: root bus resource [mem 0xe0004000000-0xe0103fffffe]
>> pci0000:c0: Unable to request _OSC control (_OSC support mask: 0x19)
>> vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
>> vgaarb: loaded
>> vgaarb: bridge control possible 0000:00:04.0
>> SCSI subsystem initialized
>> usbcore: registered new interface driver usbfs
>> usbcore: registered new interface driver hub
>> usbcore: registered new device driver usb
>> IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
>> Switching to clocksource itc
>> pnp: PnP ACPI init
>> ACPI: bus type pnp registered
>> pnp: PnP ACPI: found 8 devices
>> ACPI: ACPI bus type pnp unregistered
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
>> TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
>> TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
>> TCP: Hash tables configured (established 524288 bind 65536)
>> TCP reno registered
>> UDP hash table entries: 2048 (order: 2, 65536 bytes)
>> UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes)
>> NET: Registered protocol family 1
>> GSI 17 (level, low) -> CPU 1 (0x0100) vector 50
>> GSI 17 (level, low) -> CPU 1 (0x0100) vector 50 unregistered
>> GSI 18 (level, low) -> CPU 0 (0x0000) vector 50
>> GSI 18 (level, low) -> CPU 0 (0x0000) vector 50 unregistered
>> GSI 23 (level, low) -> CPU 1 (0x0100) vector 50
>> GSI 23 (level, low) -> CPU 1 (0x0100) vector 50 unregistered
>> Trying to unpack rootfs image as initramfs...
>> Freeing initrd memory: 6928kB freed
>> perfmon: version 2.0 IRQ 238
>> perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
>> PAL Information Facility v0.5
>> perfmon: added sampling format default_format
>> perfmon_default_smpl: default_format v2.0 registered
>> HugeTLB registered 256 MB page size, pre-allocated 0 pages
>> VFS: Disk quotas dquot_6.5.2
>> Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
>> squashfs: version 4.0 (2009/01/31) Phillip Lougher
>> SGI XFS with ACLs, security attributes, large block/inode numbers, no debug
>> enabled
>> SGI XFS Quota Management subsystem
>> msgmni has been set to 8012
>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>> io scheduler noop registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>> sn_pci_hotplug_init: PROM version does not support hotplug.
>> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>> acpiphp: Slot [7] registered
>> acpiphp: Slot [3] registered
>> acpiphp: Slot [4] registered
>> acpiphp: Slot [5] registered
>> acpiphp: Slot [6] registered
>> acpiphp: Slot [8] registered
>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>> GSI 16 (level, low) -> CPU 0 (0x0000) vector 50
>> 0000:00:01.1: ttyS1 at MMIO 0x84053000 (irq = 53) is a 16550A
>> console [ttyS1] enabled, bootconsole disabled
>> console [ttyS1] enabled, bootconsole disabled
>> 0000:00:01.1: ttyS2 at MMIO 0x84053010 (irq = 53) is a 16550A
>> 0000:00:01.1: ttyS3 at MMIO 0x84053038 (irq = 53) is a 16550A
>> EFI Time Services Driver v0.4
>> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>> ACPI: Power Button [PWRF]
>> input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
>> ACPI: Sleep Button [SLPF]
>> thermal LNXTHERM:00: registered as thermal_zone0
>> ACPI: Thermal Zone [THM0] (27 C)
>> brd: module loaded
>> loop: module loaded
>> rdac: device handler registered
>> hp_sw: device handler registered
>> emc: device handler registered
>> alua: device handler registered
>> Loading Adaptec I2O RAID: Version 2.4 Build 5go
>> Detecting Adaptec I2O RAID controllers...
>> GSI 71 (level, low) -> CPU 1 (0x0100) vector 51
>> sym0: <1010-66> rev 0x1 at pci 0000:c0:01.0 irq 54
>> sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
>> sym0: open drain IRQ line driver, using on-chip SRAM
>> sym0: using LOAD/STORE-based firmware.
>> sym0: handling phase mismatch from SCRIPTS.
>> sym0: SCSI BUS has been reset.
>> scsi0 : sym-2.2.3
>> scsi target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
>> scsi 0:0:0:0: Direct-Access COMPAQ BF07285A36 HPB6 PQ: 0 ANSI: 3
>> scsi target0:0:0: tagged command queuing enabled, command queue depth 16.
>> scsi target0:0:0: Beginning Domain Validation
>> scsi target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
>> scsi target0:0:0: Ending Domain Validation
>> scsi 0:0:1:0: Direct-Access COMPAQ BF072863BA HPB6 PQ: 0 ANSI: 3
>> scsi target0:0:1: tagged command queuing enabled, command queue depth 16.
>> scsi target0:0:1: Beginning Domain Validation
>> scsi target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
>> scsi target0:0:1: Ending Domain Validation
>> scsi 0:0:2:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3
>> scsi target0:0:2: tagged command queuing enabled, command queue depth 16.
>> scsi target0:0:2: Beginning Domain Validation
>> scsi target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
>> scsi target0:0:2: Ending Domain Validation
>> scsi 0:0:3:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3
>> scsi target0:0:3: tagged command queuing enabled, command queue depth 16.
>> scsi target0:0:3: Beginning Domain Validation
>> scsi target0:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
>> scsi target0:0:3: Ending Domain Validation
>> scsi 0:0:15:0: Processor COMPAQ PROLIANT 7L7E*DB 2.30 PQ: 0 ANSI: 2
>> scsi target0:0:15: Beginning Domain Validation
>> scsi target0:0:15: Ending Domain Validation
>> sd 0:0:1:0: [sdb] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
>> sd 0:0:0:0: [sda] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
>> sd 0:0:2:0: [sdc] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
>> sd 0:0:0:0: [sda] Write Protect is off
>> sd 0:0:1:0: [sdb] Write Protect is off
>> sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO
>> and FUA
>> sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO
>> and FUA
>> sd 0:0:3:0: [sdd] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
>> sd 0:0:2:0: [sdc] Write Protect is off
>> sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO
>> and FUA
>> sd 0:0:0:0: Attached scsi generic sg0 type 0
>> sd 0:0:1:0: Attached scsi generic sg1 type 0
>> sd 0:0:3:0: [sdd] Write Protect is off
>> sda: unknown partition table
>> sdb: unknown partition table
>> sd 0:0:2:0: Attached scsi generic sg2 type 0
>> sd 0:0:3:0: Attached scsi generic sg3 type 0
>> scsi 0:0:15:0: Attached scsi generic sg4 type 3
>> GSI 21 (level, low) -> CPU 0 (0x0000) vector 52
>> pata_cmd64x 0000:00:03.0: Secondary port is disabled
>> scsi1 : pata_cmd64x
>> scsi2 : pata_cmd64x
>> ata1: PATA max UDMA/100 cmd 0xe18 ctl 0xe24 bmdma 0xe00 irq 55
>> ata2: DUMMY
>> bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x
>> 1.70.35-0 (2011/11/10)
>> enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.31
>> e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
>> e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>> igb: Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
>> igb: Copyright (c) 2007-2012 Intel Corporation.
>> ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k
>> ixgbe: Copyright (c) 1999-2012 Intel Corporation.
>> Solarflare NET driver v3.1
>> tehuti: Tehuti Networks(R) Network Driver, 7.29.3
>> tehuti: Options: hw_csum
>> Fusion MPT base driver 3.04.20
>> Copyright (c) 1999-2008 LSI Corporation
>> Fusion MPT SPI Host driver 3.04.20
>> GSI 27 (level, low) -> CPU 1 (0x0100) vector 53
>> mptbase: ioc0: Initiating bringup
>> sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO
>> and FUA
>> sd 0:0:1:0: [sdb] Attached SCSI disk
>> sd 0:0:0:0: [sda] Attached SCSI disk
>> sdc: unknown partition table
>> sd 0:0:2:0: [sdc] Attached SCSI disk
>> sdd: unknown partition table
>> sd 0:0:3:0: [sdd] Attached SCSI disk
>> ata1.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.20, max MWDMA2
>> ata1.00: configured for MWDMA2
>> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.20 PQ: 0 ANSI: 5
>> sr0: scsi3-mmc drive: 40x/24x writer cd/rw xa/form2 cdda tray
>> cdrom: Uniform CD-ROM driver Revision: 3.20
>> sr 1:0:0:0: Attached scsi generic sg5 type 5
>> ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
>> scsi3 : ioc0: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=56
>> scsi 3:0:1:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3
>> scsi target3:0:1: Beginning Domain Validation
>> scsi target3:0:1: Ending Domain Validation
>> scsi target3:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25
>> ns, offset 127)
>> sd 3:0:1:0: Attached scsi generic sg6 type 0
>> sd 3:0:1:0: [sde] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
>> sd 3:0:1:0: [sde] Write Protect is off
>> sd 3:0:1:0: [sde] Write cache: disabled, read cache: enabled, supports DPO
>> and FUA
>> GSI 28 (level, low) -> CPU 0 (0x0000) vector 54
>> mptbase: ioc1: Initiating bringup
>> ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
>> scsi4 : ioc1: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=57
>> scsi 4:0:0:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3
>> scsi target4:0:0: Beginning Domain Validation
>> sde: sde1 sde2 sde3 sde4 sde5
>> scsi target4:0:0: Ending Domain Validation
>> scsi target4:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25
>> ns, offset 127)
>> sd 4:0:0:0: Attached scsi generic sg7 type 0
>> sd 4:0:0:0: [sdf] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
>> sd 3:0:1:0: [sde] Attached SCSI disk
>> sd 4:0:0:0: [sdf] Write Protect is off
>> sd 4:0:0:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO
>> and FUA
>> Fusion MPT FC Host driver 3.04.20
>> Fusion MPT SAS Host driver 3.04.20
>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> GSI 23 (level, low) -> CPU 1 (0x0100) vector 55
>> ehci_hcd 0000:00:02.2: EHCI Host Controller
>> ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>> sdf: sdf1 sdf2 sdf3 sdf4
>> ehci_hcd 0000:00:02.2: irq 52, io mem 0x84050000
>> sd 4:0:0:0: [sdf] Attached SCSI disk
>> ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 0.95
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 5 ports detected
>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> GSI 17 (level, low) -> CPU 0 (0x0000) vector 56
>> ohci_hcd 0000:00:02.0: OHCI Host Controller
>> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>> ohci_hcd 0000:00:02.0: irq 50, io mem 0x84052000
>> hub 2-0:1.0: USB hub found
>> hub 2-0:1.0: 3 ports detected
>> GSI 18 (level, low) -> CPU 1 (0x0100) vector 57
>> ohci_hcd 0000:00:02.1: OHCI Host Controller
>> ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>> ohci_hcd 0000:00:02.1: irq 51, io mem 0x84051000
>> hub 3-0:1.0: USB hub found
>> hub 3-0:1.0: 2 ports detected
>> uhci_hcd: USB Universal Host Controller Interface driver
>> mousedev: PS/2 mouse device common for all mice
>> device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
>> [email protected]
>> EFI Variables Facility v0.08 2004-May-17
>> usbcore: registered new interface driver usbhid
>> usbhid: USB HID core driver
>> TCP cubic registered
>> Initializing XFRM netlink socket
>> NET: Registered protocol family 17
>> Freeing unused kernel memory: 1152kB freed
>>>> Loading modules
>> :: Scanning for cciss...cciss loaded.
>> :: Scanning for qla2xxx...qla2xxx loaded.
>> :: Scanning for lpfc...lpfc loaded.
>> :: Scanning for usb-storage...usb-storage loaded.
>> :: Scanning for scsi_wait_scan...scsi_wait_scan loaded.
>> :: Scanning for dm-mirror...dm-log, dm-region-hash, dm-mirror loaded.
>> :: Scanning for dm-snapshot...dm-snapshot loaded.
>> :: Scanning for raid0...raid0 loaded.
>> :: Scanning for raid1...raid1 loaded.
>> :: Scanning for raid456...async_tx, xor, async_xor, raid6_pq, async_pq,
>> async_memcpy, async_raid6_recov, raid456 loaded.
>> :: Scanning for raid10...raid10 loaded.
>> :: Scanning for nfs...sunrpc, lockd, nfs loaded.
>> :: Scanning for fuse...fuse loaded.
>> :: Scanning for e1000...e1000 loaded.
>> :: Scanning for tg3...libphy, tg3 loaded.
>>>> Activating mdev
>>>> Loading keymaps
>> Please select a keymap from the following list by typing in the appropriate
>> name or number. Hit Enter for the default "us/41" US English keymap.
>>
>> 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf
>> 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq
>> 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua
>> 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk
>> 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us
>> 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe
>>
>> << Load keymap (Enter for default):
>>>> Keeping default keymap
>>>> Making tmpfs for /newroot
>>>> Looking for the cdrom
>>>> Attempting to mount media:- /dev/sr0
>>>> Media found on /dev/sr0
>>>> Determining root device...
>>>> Determining looptype ...
>>>> Mounting squashfs filesystem
>>>> Copying read-write image contents to tmpfs
>>>> No cdupdate.sh script found, skipping...
>>>> Booting (initramfs)..
>> INIT: version 2.88 booting
>>
>> OpenRC 0.9.8.4 is starting up Gentoo Linux (ia64)
>>
>> * /proc is already mounted, skipping
>> * WARNING: rc_sys not defined in rc.conf. Falling back to automatic
>> detection
>> * Caching service dependencies ...
>> Service `unmute' needs non existent service `alsasound'
>> [ ok ]
>> * Mounting debug filesystem ...
>> [ ok ]
>> * /dev is already mounted
>> * Starting udev ...
>> [ ok ]
>> * Populating /dev with existing devices through uevents ...
>> [ ok ]
>> * Waiting for uevents to be processed ...
>> [ ok ]
>> * Mounting /dev/shm ...
>> [ ok ]
>> * Setting system clock using the hardware clock [UTC] ...
>> [ ok ]
>> * Autoloaded 0 module(s)
>> * Starting up RAID devices ...
>> mdadm: No arrays found in config file or automatically
>> [ !! ]
>> [ ok ]
>> * Checking local filesystems ...
>> [ ok ]
>> * Updating /etc/mtab ...
>> [ ok ]
>> * Mounting local filesystems ...
>> [ ok ]
>> * Configuring kernel parameters ...
>> [ ok ]
>> mkdir: cannot create directory '/var/run': File exists
>> * failed to create needed directory /var/run
>> [ !! ]
>> * ERROR: bootmisc failed to start
>> * Setting hostname to livecd ...
>> [ ok ]
>> * Setting terminal encoding [UTF-8] ...
>> [ ok ]
>> * Setting keyboard mode [UTF-8] ...
>> [ ok ]
>> * Loading key mappings [us] ...
>> [ ok ]
>> * Bringing up interface lo
>> * Caching network module dependencies
>> * 127.0.0.1/8 ...
>> [ ok ]
>> * Adding routes
>> * 127.0.0.0/8 via 127.0.0.1 ...
>> [ ok ]
>> * Mounting USB device filesystem [usbfs] ...
>> [ ok ]
>> * Mounting misc binary format filesystem ...
>> [ ok ]
>> * Loading custom binary format handlers ...
>> [ ok ]
>> * Activating swap devices ...
>> [ ok ]
>> INIT: Entering runlevel: 3
>> * Checking for firmware to unpack ...
>> * Unpacking firmware ...
>> [ ok ]
>> [ ok ]
>> * Starting hwsetup ...
>> [ ok ]
>> mkdir: cannot create directory '/var/run': File exists
>> * failed to create needed directory /var/run
>> [ !! ]
>> * ERROR: bootmisc failed to start
>> * Starting syslog-ng ...
>> Error creating persistent state file;
>> filename='/var/lib/misc/syslog-ng.persist-', error='No such file or
>> directory (2)'
>> * start-stop-daemon: failed to start `/usr/sbin/syslog-ng'
>> * Failed to start syslog-ng
>> [ !! ]
>> * ERROR: syslog-ng failed to start
>> * Starting acpid ...
>> acpid: can't open socket /var/run/acpid.socket: No such file or directory
>> * Failed to start acpid
>> [ !! ]
>> * ERROR: acpid failed to start
>> * ERROR: unmute needs service(s) alsasound
>> * Mouse is Device 05f3:0203 at /dev/input/mice ...
>> * Caching service dependencies ...
>> Service `unmute' needs non existent service `alsasound'
>> [ ok ]
>> * Starting gpm ...
>> [ ok ]
>> * Starting rpcbind ...
>> [ !! ]
>> * ERROR: rpcbind failed to start
>> * ERROR: cannot start rpc.statd as rpcbind would not start
>> * ERROR: cannot start nfsmount as rpcbind would not start
>> * Auto-scrambling root password for security ...
>> [ ok ]
>> * ERROR: cannot start autoconfig as acpid would not start
>> * Adjusting inittab ...
>> [ ok ]
>> * Mounting network filesystems ...
>> [ ok ]
>> * Doing udev cleanups
>> * Starting local
>> [ ok ]
>>
>> Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle
>> persone indicate. La diffusione, copia o qualsiasi altra azione derivante
>> dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora
>> abbiate ricevuto questo documento per errore siete cortesemente pregati di
>> darne immediata comunicazione al mittente e di provvedere alla sua
>> distruzione, Grazie.
>>
>> This e-mail and any attachments is confidential and may contain privileged
>> information intended for the addressee(s) only. Dissemination, copying,
>> printing or use by anybody else is unauthorised. If you are not the intended
>> recipient, please delete this message and any attachments and advise the
>> sender by return e-mail, Thanks.
>>
>>
>> --
>> To UNSUBSCRIBE, email to [email protected]
>> with a subject of "unsubscribe". Trouble? Contact [email protected]
>> Archive:
>> http://lists.debian.org/5DA6D16A39710843ACA344B75F2C76891AAF0D1818@GRFMBX702RM001.griffon.local
>>
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive:
http://lists.debian.org/caa9xbm47x1sxtu7jfxul+tl_zkye8refxh4h9o94hedgswz...@mail.gmail.com
