Hi, Sorry for delay... I don't know where to download 3.3.8 kernel config file used by gentoo installer kernel
The current squeeze->wheezy system does not boot (only with squeeze rescue CD/netboot) I downgraded to the following squeeze packages (downloading packages and installing with dpkg): initramfs-tools_0.98.8_all.deb udev_164-3_ia64.deb libudev0_164-3_ia64.deb But it's not generating initrd, with errors I sent on past message. I would like to have the wheezy system working booting 2.6.32 squeeze kernel. So I will be able to compile 3.2 kernels with different configs to check what's wrong with debian one. Fabio -----Messaggio originale----- Da: Émeric Maschino [mailto:[email protected]] Inviato: sabato 6 ottobre 2012 19.50 A: Bettoni Fabio Cc: [email protected] Oggetto: Re: Apt-get dist-upgrade squeeze->wheezy Well, I don't understand what's going wrong with your system. I can confirm that both 3.3.8-gentoo and current Squeeze kernels are booting fine on my zx6000. Did you try to rebuild Squeeze kernel using 3.3.8-gentoo .config file? Emeric 2012/10/4 Bettoni Fabio <[email protected]>: > > Hi, > > I tried to boot gentoo install-ia64-minimal-20121002.iso > > It uses 3.3.8-gentoo and it boots almost correctly (didn't get login > prompt and waiting a lot on acpi staff) > > So I think there's something different between configs. > > Do you have an idea ? Can you help me ? > > Fabio > > > Loading.: Internal Bootable DVD > Starting: Internal Bootable DVD > > Welcome to the Gentoo/IA64 LiveCD! > > To boot the CD with default options type 'gentoo' or hit the Enter key. > To boot, forcing a serial console on ttyS0 at 9600bps type 'gentoo-serial'. > To boot, if you're using iLO remote console, type 'gentoo-ilo', which > forces a serial console on ttyS3 at 9600bps. > To boot, if you're using an SGI system, type 'gentoo-sgi', which > forces a serial console on ttySG0 at 115200bps. > > You may add extra arguments to either to modify the boot options. > > Please report any issues to <[email protected]>! > > For further information on Gentoo/IA64 installation please see the > IA64 installation handbook. > > ELILO boot: Uncompressing Linux... done Loading file > \efi\boot\gentoo.igz...done Linux version 3.3.8-gentoo (root@dolphin) > (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.6, pie-0.4.7) ) #1 SMP Wed Oct > 3 04:40:00 UTC 2012 EFI v1.10 by HP: SALsystab=0x3e528000 ACPI > 2.0=0x3fe22000 SMBIOS=0x3e52a000 HCDP=0x3fe20000 booting generic > kernel on platform hpzx1 > PCDP: v3 at 0x3fe20000 > Early serial console at MMIO 0x84053000 (options '9600n8') bootconsole > [uart8250] enabled > ACPI: RSDP 000000003fe22000 00028 (v02 HP) > ACPI: XSDT 000000003fe2202c 00094 (v01 HP rx4640 00000000 HP 00000000) > ACPI: FACP 000000003fe36cd8 000F4 (v03 HP rx4640 00000000 HP 00000000) > ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 > (20120111/tbfadt-548) ACPI Warning: 32/64X length mismatch in Gpe1Block: > 32/16 (20120111/tbfadt-548) > ACPI: DSDT 000000003fe221c8 0D0F5 (v01 HP rx4640 00000007 INTL 20050309) > ACPI: FACS 000000003fe36dd0 00040 > ACPI: SPCR 000000003fe36e10 00050 (v01 HP rx4640 00000000 HP 00000000) > ACPI: DBGP 000000003fe36e60 00034 (v01 HP rx4640 00000000 HP 00000000) > ACPI: APIC 000000003fe37080 000B0 (v01 HP rx4640 00000000 HP 00000000) > ACPI: SPMI 000000003fe36e98 00050 (v04 HP rx4640 00000000 HP 00000000) > ACPI: CPEP 000000003fe36f50 00034 (v01 HP rx4640 00000000 HP 00000000) > ACPI: SSDT 000000003fe2f2c8 001A7 (v01 HP rx4640 00000006 INTL 20050309) > ACPI: SSDT 000000003fe2f478 00F65 (v01 HP rx4640 00000006 INTL 20050309) > ACPI: SSDT 000000003fe303e8 011CD (v01 HP rx4640 00000006 INTL 20050309) > ACPI: SSDT 000000003fe315b8 021B5 (v01 HP rx4640 00000006 INTL 20050309) > ACPI: SSDT 000000003fe33778 021B5 (v01 HP rx4640 00000006 INTL 20050309) > ACPI: SSDT 000000003fe35938 011CD (v01 HP rx4640 00000006 INTL 20050309) > ACPI: SSDT 000000003fe36b08 000DC (v01 HP rx4640 00000006 INTL 20050309) > ACPI: SSDT 000000003fe36be8 000E0 (v01 HP rx4640 00000006 INTL 20050309) > ACPI: Local APIC address c0000000fee00000 > 2 CPUs available, 2 CPUs total > SMP: Allowing 2 CPUs, 0 hotplug CPUs > Initial ramdisk at: 0xe0000040fe8c1000 (7111052 bytes) SAL 3.1: HP > version 4.28 SAL Platform features: None > SAL: AP wakeup using external interrupt vector 0xff MCA related > initialization done Virtual mem_map starts at 0xa0007fffc7200000 Zone > PFN ranges: > DMA 0x00000400 -> 0x00040000 > Normal 0x00040000 -> 0x01040000 > Movable zone start PFN for each node > Early memory PFN ranges > 0: 0x00000400 -> 0x0000f7c9 > 0: 0x0000f88f -> 0x0000f94a > 0: 0x0000ff00 -> 0x0000ff88 > 0: 0x01010000 -> 0x0103fbff > 0: 0x0103fc00 -> 0x0103fef6 > 0: 0x0103ff1f -> 0x0103ff80 > 0: 0x0103ffa0 -> 0x0103fff8 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 201021 Policy zone: Normal Kernel command line: > BOOT_IMAGE=atapi0:/efi/boot/gentoo initrd=gentoo.igz root=/dev/ram0 > init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot > PID hash table entries: 4096 (order: 1, 32768 bytes) > Memory: 4095648k/4119584k available (13370k code, 52480k reserved, > 6165k data, 1152k init) Hierarchical RCU implementation. > NR_IRQS:1024 > ACPI: Local APIC address c0000000fee00000 GSI 20 (level, low) -> CPU 0 > (0x0000) vector 49 > Console: colour VGA+ 80x25 > Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032) > pid_max: default: 32768 minimum: 301 > Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes) > Mount-cache hash table entries: 1024 > ACPI: Core revision 20120111 > Boot processor id 0x0/0x0 > Fixed BSP b0 value from CPU 1 > CPU 1: synchronized ITC with CPU 0 (last diff -32 cycles, maxerr 718 > cycles) Brought up 2 CPUs Total of 2 processors activated (4780.03 > BogoMIPS). > DMI 2.3 present. > NET: Registered protocol family 16 > ACPI: bus type pci registered > bio: create slab <bio-0> at 0 > ACPI: Added _OSI(Module Device) > ACPI: Added _OSI(Processor Device) > ACPI: Added _OSI(3.0 _SCP Extensions) > ACPI: Added _OSI(Processor Aggregator Device) > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOSAPIC for interrupt routing > ACPI: No dock devices found. > ACPI: PCI Root Bridge [L000] (domain 0000 [bus 00-1f]) pci_root > HWP0002:00: host bridge window [io 0x0000-0x1fff] pci_root > HWP0002:00: host bridge window [mem 0x000a0000-0x000fffff] pci_root > HWP0002:00: host bridge window [mem 0x80000000-0x8fffffff] pci_root > HWP0002:00: host bridge window [mem 0x80004000000-0x80103fffffe] PCI > host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io > 0x0000-0x1fff] pci_bus 0000:00: root bus resource [mem > 0x000a0000-0x000fffff] pci_bus 0000:00: root bus resource [mem > 0x80000000-0x8fffffff] pci_bus 0000:00: root bus resource [mem > 0x80004000000-0x80103fffffe] > pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19) > ACPI: PCI Root Bridge [L001] (domain 0000 [bus 20-3f]) pci_root > HWP0002:01: host bridge window [io 0x2000-0x3fff] pci_root > HWP0002:01: host bridge window [mem 0x90000000-0x9fffffff] pci_root > HWP0002:01: host bridge window [mem 0x90004000000-0x90103fffffe] PCI > host bridge to bus 0000:20 pci_bus 0000:20: root bus resource [io > 0x2000-0x3fff] pci_bus 0000:20: root bus resource [mem > 0x90000000-0x9fffffff] pci_bus 0000:20: root bus resource [mem > 0x90004000000-0x90103fffffe] > pci0000:20: Unable to request _OSC control (_OSC support mask: 0x19) > ACPI: PCI Root Bridge [L002] (domain 0000 [bus 40-7f]) pci_root > HWP0002:02: host bridge window [io 0x4000-0x7fff] pci_root > HWP0002:02: host bridge window [mem 0xa0000000-0xbfffffff] pci_root > HWP0002:02: host bridge window [mem 0xa0004000000-0xa0103fffffe] PCI > host bridge to bus 0000:40 pci_bus 0000:40: root bus resource [io > 0x4000-0x7fff] pci_bus 0000:40: root bus resource [mem > 0xa0000000-0xbfffffff] pci_bus 0000:40: root bus resource [mem > 0xa0004000000-0xa0103fffffe] > pci0000:40: Unable to request _OSC control (_OSC support mask: 0x19) > ACPI: PCI Root Bridge [L004] (domain 0000 [bus 80-9f]) pci_root > HWP0002:03: host bridge window [io 0x8000-0x9fff] pci_root > HWP0002:03: host bridge window [mem 0xc0000000-0xcfffffff] pci_root > HWP0002:03: host bridge window [mem 0xc0004000000-0xc0103fffffe] PCI > host bridge to bus 0000:80 pci_bus 0000:80: root bus resource [io > 0x8000-0x9fff] pci_bus 0000:80: root bus resource [mem > 0xc0000000-0xcfffffff] pci_bus 0000:80: root bus resource [mem > 0xc0004000000-0xc0103fffffe] > pci0000:80: Unable to request _OSC control (_OSC support mask: 0x19) > ACPI: PCI Root Bridge [L005] (domain 0000 [bus a0-bf]) pci_root > HWP0002:04: host bridge window [io 0xa000-0xbfff] pci_root > HWP0002:04: host bridge window [mem 0xd0000000-0xdfffffff] pci_root > HWP0002:04: host bridge window [mem 0xd0004000000-0xd0103fffffe] PCI > host bridge to bus 0000:a0 pci_bus 0000:a0: root bus resource [io > 0xa000-0xbfff] pci_bus 0000:a0: root bus resource [mem > 0xd0000000-0xdfffffff] pci_bus 0000:a0: root bus resource [mem > 0xd0004000000-0xd0103fffffe] > pci0000:a0: Unable to request _OSC control (_OSC support mask: 0x19) > ACPI: PCI Root Bridge [L006] (domain 0000 [bus c0-ff]) pci_root > HWP0002:05: host bridge window [io 0xc000-0xffff] pci_root > HWP0002:05: host bridge window [mem 0xe0000000-0xfdffffff] pci_root > HWP0002:05: host bridge window [mem 0xe0004000000-0xe0103fffffe] PCI > host bridge to bus 0000:c0 pci_bus 0000:c0: root bus resource [io > 0xc000-0xffff] pci_bus 0000:c0: root bus resource [mem > 0xe0000000-0xfdffffff] pci_bus 0000:c0: root bus resource [mem > 0xe0004000000-0xe0103fffffe] > pci0000:c0: Unable to request _OSC control (_OSC support mask: 0x19) > vgaarb: device added: > PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > vgaarb: bridge control possible 0000:00:04.0 SCSI subsystem > initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000 Switching > to clocksource itc > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 8 devices > ACPI: ACPI bus type pnp unregistered > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 6, 1048576 bytes) > TCP established hash table entries: 524288 (order: 9, 8388608 bytes) > TCP bind hash table entries: 65536 (order: 6, 1048576 bytes) > TCP: Hash tables configured (established 524288 bind 65536) TCP reno > registered UDP hash table entries: 2048 (order: 2, 65536 bytes) > UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes) > NET: Registered protocol family 1 > GSI 17 (level, low) -> CPU 1 (0x0100) vector 50 GSI 17 (level, low) -> > CPU 1 (0x0100) vector 50 unregistered GSI 18 (level, low) -> CPU 0 > (0x0000) vector 50 GSI 18 (level, low) -> CPU 0 (0x0000) vector 50 > unregistered GSI 23 (level, low) -> CPU 1 (0x0100) vector 50 GSI 23 > (level, low) -> CPU 1 (0x0100) vector 50 unregistered Trying to unpack > rootfs image as initramfs... > Freeing initrd memory: 6928kB freed > perfmon: version 2.0 IRQ 238 > perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 > bits) PAL Information Facility v0.5 > perfmon: added sampling format default_format > perfmon_default_smpl: default_format v2.0 registered HugeTLB > registered 256 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) > squashfs: version 4.0 (2009/01/31) Phillip Lougher SGI XFS with ACLs, > security attributes, large block/inode numbers, no debug enabled SGI > XFS Quota Management subsystem msgmni has been set to 8012 Block layer > SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler > noop registered io scheduler deadline registered io scheduler cfq > registered (default) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > sn_pci_hotplug_init: PROM version does not support hotplug. > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > acpiphp: Slot [7] registered > acpiphp: Slot [3] registered > acpiphp: Slot [4] registered > acpiphp: Slot [5] registered > acpiphp: Slot [6] registered > acpiphp: Slot [8] registered > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled GSI 16 > (level, low) -> CPU 0 (0x0000) vector 50 > 0000:00:01.1: ttyS1 at MMIO 0x84053000 (irq = 53) is a 16550A console > [ttyS1] enabled, bootconsole disabled console [ttyS1] enabled, > bootconsole disabled > 0000:00:01.1: ttyS2 at MMIO 0x84053010 (irq = 53) is a 16550A > 0000:00:01.1: ttyS3 at MMIO 0x84053038 (irq = 53) is a 16550A EFI Time > Services Driver v0.4 > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > ACPI: Power Button [PWRF] > input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 > ACPI: Sleep Button [SLPF] > thermal LNXTHERM:00: registered as thermal_zone0 > ACPI: Thermal Zone [THM0] (27 C) > brd: module loaded > loop: module loaded > rdac: device handler registered > hp_sw: device handler registered > emc: device handler registered > alua: device handler registered > Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O > RAID controllers... > GSI 71 (level, low) -> CPU 1 (0x0100) vector 51 > sym0: <1010-66> rev 0x1 at pci 0000:c0:01.0 irq 54 > sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking > sym0: open drain IRQ line driver, using on-chip SRAM > sym0: using LOAD/STORE-based firmware. > sym0: handling phase mismatch from SCRIPTS. > sym0: SCSI BUS has been reset. > scsi0 : sym-2.2.3 > scsi target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > scsi 0:0:0:0: Direct-Access COMPAQ BF07285A36 HPB6 PQ: 0 ANSI: 3 > scsi target0:0:0: tagged command queuing enabled, command queue depth 16. > scsi target0:0:0: Beginning Domain Validation scsi target0:0:0: > FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62) scsi target0:0:0: > Ending Domain Validation > scsi 0:0:1:0: Direct-Access COMPAQ BF072863BA HPB6 PQ: 0 ANSI: 3 > scsi target0:0:1: tagged command queuing enabled, command queue depth 16. > scsi target0:0:1: Beginning Domain Validation scsi target0:0:1: > FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) scsi target0:0:1: > Ending Domain Validation > scsi 0:0:2:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3 > scsi target0:0:2: tagged command queuing enabled, command queue depth 16. > scsi target0:0:2: Beginning Domain Validation scsi target0:0:2: > FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) scsi target0:0:2: > Ending Domain Validation > scsi 0:0:3:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3 > scsi target0:0:3: tagged command queuing enabled, command queue depth 16. > scsi target0:0:3: Beginning Domain Validation scsi target0:0:3: > FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) scsi target0:0:3: > Ending Domain Validation > scsi 0:0:15:0: Processor COMPAQ PROLIANT 7L7E*DB 2.30 PQ: 0 ANSI: 2 > scsi target0:0:15: Beginning Domain Validation scsi target0:0:15: > Ending Domain Validation sd 0:0:1:0: [sdb] 142264000 512-byte logical > blocks: (72.8 GB/67.8 GiB) sd 0:0:0:0: [sda] 142264000 512-byte > logical blocks: (72.8 GB/67.8 GiB) sd 0:0:2:0: [sdc] 142264000 > 512-byte logical blocks: (72.8 GB/67.8 GiB) sd 0:0:0:0: [sda] Write > Protect is off sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: > [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA > sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports > DPO and FUA sd 0:0:3:0: [sdd] 142264000 512-byte logical blocks: (72.8 > GB/67.8 GiB) sd 0:0:2:0: [sdc] Write Protect is off sd 0:0:2:0: [sdc] > Write cache: disabled, read cache: enabled, supports DPO and FUA sd > 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi > generic sg1 type 0 sd 0:0:3:0: [sdd] Write Protect is off > sda: unknown partition table > sdb: unknown partition table > sd 0:0:2:0: Attached scsi generic sg2 type 0 sd 0:0:3:0: Attached scsi > generic sg3 type 0 scsi 0:0:15:0: Attached scsi generic sg4 type 3 GSI > 21 (level, low) -> CPU 0 (0x0000) vector 52 pata_cmd64x 0000:00:03.0: > Secondary port is disabled > scsi1 : pata_cmd64x > scsi2 : pata_cmd64x > ata1: PATA max UDMA/100 cmd 0xe18 ctl 0xe24 bmdma 0xe00 irq 55 > ata2: DUMMY > bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver > bnx2x 1.70.35-0 (2011/11/10) > enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.31 > e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k > e1000e: Copyright(c) 1999 - 2011 Intel Corporation. > igb: Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k > igb: Copyright (c) 2007-2012 Intel Corporation. > ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version > 3.6.7-k > ixgbe: Copyright (c) 1999-2012 Intel Corporation. > Solarflare NET driver v3.1 > tehuti: Tehuti Networks(R) Network Driver, 7.29.3 > tehuti: Options: hw_csum > Fusion MPT base driver 3.04.20 > Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver > 3.04.20 GSI 27 (level, low) -> CPU 1 (0x0100) vector 53 > mptbase: ioc0: Initiating bringup > sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports > DPO and FUA sd 0:0:1:0: [sdb] Attached SCSI disk sd 0:0:0:0: [sda] > Attached SCSI disk > sdc: unknown partition table > sd 0:0:2:0: [sdc] Attached SCSI disk > sdd: unknown partition table > sd 0:0:3:0: [sdd] Attached SCSI disk > ata1.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.20, max MWDMA2 > ata1.00: configured for MWDMA2 > scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.20 PQ: 0 ANSI: 5 > sr0: scsi3-mmc drive: 40x/24x writer cd/rw xa/form2 cdda tray > cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi > generic sg5 type 5 > ioc0: LSI53C1030 C0: Capabilities={Initiator,Target} > scsi3 : ioc0: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=56 > scsi 3:0:1:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3 > scsi target3:0:1: Beginning Domain Validation scsi target3:0:1: Ending > Domain Validation scsi target3:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT > IU QAS RTI PCOMP (6.25 ns, offset 127) sd 3:0:1:0: Attached scsi > generic sg6 type 0 sd 3:0:1:0: [sde] 143374738 512-byte logical > blocks: (73.4 GB/68.3 GiB) sd 3:0:1:0: [sde] Write Protect is off sd > 3:0:1:0: [sde] Write cache: disabled, read cache: enabled, supports > DPO and FUA GSI 28 (level, low) -> CPU 0 (0x0000) vector 54 > mptbase: ioc1: Initiating bringup > ioc1: LSI53C1030 C0: Capabilities={Initiator,Target} > scsi4 : ioc1: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=57 > scsi 4:0:0:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3 > scsi target4:0:0: Beginning Domain Validation > sde: sde1 sde2 sde3 sde4 sde5 > scsi target4:0:0: Ending Domain Validation scsi target4:0:0: FAST-160 > WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25 ns, offset 127) sd > 4:0:0:0: Attached scsi generic sg7 type 0 sd 4:0:0:0: [sdf] 143374738 > 512-byte logical blocks: (73.4 GB/68.3 GiB) sd 3:0:1:0: [sde] Attached > SCSI disk sd 4:0:0:0: [sdf] Write Protect is off sd 4:0:0:0: [sdf] > Write cache: disabled, read cache: enabled, supports DPO and FUA > Fusion MPT FC Host driver 3.04.20 Fusion MPT SAS Host driver 3.04.20 > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver GSI 23 > (level, low) -> CPU 1 (0x0100) vector 55 ehci_hcd 0000:00:02.2: EHCI > Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, > assigned bus number 1 > sdf: sdf1 sdf2 sdf3 sdf4 > ehci_hcd 0000:00:02.2: irq 52, io mem 0x84050000 sd 4:0:0:0: [sdf] > Attached SCSI disk ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 0.95 > hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver GSI 17 (level, > low) -> CPU 0 (0x0000) vector 56 ohci_hcd 0000:00:02.0: OHCI Host > Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus > number 2 ohci_hcd 0000:00:02.0: irq 50, io mem 0x84052000 hub 2-0:1.0: > USB hub found hub 2-0:1.0: 3 ports detected GSI 18 (level, low) -> CPU > 1 (0x0100) vector 57 ohci_hcd 0000:00:02.1: OHCI Host Controller > ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:02.1: irq 51, io mem 0x84051000 hub 3-0:1.0: USB hub > found hub 3-0:1.0: 2 ports detected > uhci_hcd: USB Universal Host Controller Interface driver > mousedev: PS/2 mouse device common for all mice > device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: > [email protected] EFI Variables Facility v0.08 2004-May-17 > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > TCP cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 17 > Freeing unused kernel memory: 1152kB freed >>> Loading modules > :: Scanning for cciss...cciss loaded. > :: Scanning for qla2xxx...qla2xxx loaded. > :: Scanning for lpfc...lpfc loaded. > :: Scanning for usb-storage...usb-storage loaded. > :: Scanning for scsi_wait_scan...scsi_wait_scan loaded. > :: Scanning for dm-mirror...dm-log, dm-region-hash, dm-mirror loaded. > :: Scanning for dm-snapshot...dm-snapshot loaded. > :: Scanning for raid0...raid0 loaded. > :: Scanning for raid1...raid1 loaded. > :: Scanning for raid456...async_tx, xor, async_xor, raid6_pq, async_pq, > async_memcpy, async_raid6_recov, raid456 loaded. > :: Scanning for raid10...raid10 loaded. > :: Scanning for nfs...sunrpc, lockd, nfs loaded. > :: Scanning for fuse...fuse loaded. > :: Scanning for e1000...e1000 loaded. > :: Scanning for tg3...libphy, tg3 loaded. >>> Activating mdev >>> Loading keymaps > Please select a keymap from the following list by typing in the > appropriate name or number. Hit Enter for the default "us/41" US English > keymap. > > 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf > 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq > 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua > 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk > 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us > 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe > > << Load keymap (Enter for default): >>> Keeping default keymap >>> Making tmpfs for /newroot >>> Looking for the cdrom >>> Attempting to mount media:- /dev/sr0 Media found on /dev/sr0 >>> Determining root device... >>> Determining looptype ... >>> Mounting squashfs filesystem >>> Copying read-write image contents to tmpfs No cdupdate.sh script >>> found, skipping... >>> Booting (initramfs).. > INIT: version 2.88 booting > > OpenRC 0.9.8.4 is starting up Gentoo Linux (ia64) > > * /proc is already mounted, skipping > * WARNING: rc_sys not defined in rc.conf. Falling back to automatic detection > * Caching service dependencies ... > Service `unmute' needs non existent service `alsasound' > [ ok ] > * Mounting debug filesystem ... > [ ok ] > * /dev is already mounted > * Starting udev ... > [ ok ] > * Populating /dev with existing devices through uevents ... > [ ok ] > * Waiting for uevents to be processed ... > [ ok ] > * Mounting /dev/shm ... > [ ok ] > * Setting system clock using the hardware clock [UTC] ... > [ ok ] > * Autoloaded 0 module(s) > * Starting up RAID devices ... > mdadm: No arrays found in config file or automatically > [ !! ] > [ ok ] > * Checking local filesystems ... > [ ok ] > * Updating /etc/mtab ... > [ ok ] > * Mounting local filesystems ... > [ ok ] > * Configuring kernel parameters ... > [ ok ] > mkdir: cannot create directory '/var/run': File exists > * failed to create needed directory /var/run > [ !! ] > * ERROR: bootmisc failed to start > * Setting hostname to livecd ... > [ ok ] > * Setting terminal encoding [UTF-8] ... > [ ok ] > * Setting keyboard mode [UTF-8] ... > [ ok ] > * Loading key mappings [us] ... > [ ok ] > * Bringing up interface lo > * Caching network module dependencies > * 127.0.0.1/8 ... > [ ok ] > * Adding routes > * 127.0.0.0/8 via 127.0.0.1 ... > [ ok ] > * Mounting USB device filesystem [usbfs] ... > [ ok ] > * Mounting misc binary format filesystem ... > [ ok ] > * Loading custom binary format handlers ... > [ ok ] > * Activating swap devices ... > [ ok ] > INIT: Entering runlevel: 3 > * Checking for firmware to unpack ... > * Unpacking firmware ... > [ ok ] > [ ok ] > * Starting hwsetup ... > [ ok ] > mkdir: cannot create directory '/var/run': File exists > * failed to create needed directory /var/run > [ !! ] > * ERROR: bootmisc failed to start > * Starting syslog-ng ... > Error creating persistent state file; > filename='/var/lib/misc/syslog-ng.persist-', error='No such file or directory > (2)' > * start-stop-daemon: failed to start `/usr/sbin/syslog-ng' > * Failed to start syslog-ng > [ !! ] > * ERROR: syslog-ng failed to start > * Starting acpid ... > acpid: can't open socket /var/run/acpid.socket: No such file or directory > * Failed to start acpid > [ !! ] > * ERROR: acpid failed to start > * ERROR: unmute needs service(s) alsasound > * Mouse is Device 05f3:0203 at /dev/input/mice ... > * Caching service dependencies ... > Service `unmute' needs non existent service `alsasound' > [ ok ] > * Starting gpm ... > [ ok ] > * Starting rpcbind ... > [ !! ] > * ERROR: rpcbind failed to start > * ERROR: cannot start rpc.statd as rpcbind would not start > * ERROR: cannot start nfsmount as rpcbind would not start > * Auto-scrambling root password for security ... > [ ok ] > * ERROR: cannot start autoconfig as acpid would not start > * Adjusting inittab ... > [ ok ] > * Mounting network filesystems ... > [ ok ] > * Doing udev cleanups > * Starting local > [ ok ] > > Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle > persone indicate. La diffusione, copia o qualsiasi altra azione derivante > dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora > abbiate ricevuto questo documento per errore siete cortesemente pregati di > darne immediata comunicazione al mittente e di provvedere alla sua > distruzione, Grazie. > > This e-mail and any attachments is confidential and may contain privileged > information intended for the addressee(s) only. Dissemination, copying, > printing or use by anybody else is unauthorised. If you are not the intended > recipient, please delete this message and any attachments and advise the > sender by return e-mail, Thanks. > > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact [email protected] > Archive: > http://lists.debian.org/5DA6D16A39710843ACA344B75F2C76891AAF0D1818@GRFMBX702RM001.griffon.local > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/C56959778F265C49AE6E1D454DCB4D2301441319@TELMBB001RM001.telecomitalia.local
